pusherman

I have an adaptronic ecu and when I plug in to my pc it says I'm running v1... how can i update to v9 and is there any point in doing this?

cheers
Tom

18psi

iTrader: (76)

are you talking about the firmware or the software? There are different versions of each. Both you download, Wari you just open and use, firmware you flash in using the little program it gives you in the download package

pusherman

firmware I think... Its just the message that pops up when I connect the ECU...

in WARI when I go to the firmware upgrade screen and click the file V9 file I want it asks me to reset the ecu.. bit confused

triple88a

iTrader: (2)

Jesus i'm still using V6. Wonder how much more stable V9 is..

pusherman

Well i'm stuck on V1 so help me get off it :-)

TravisR

iTrader: (9)

Hey Pusher,

Goto the update firmware screen, and then turn the key to off the position and back on again. It should now show a serial number and say its ready. Select the file you download from www.adaptronic.com.au/downloads to update the firmware to V9. Then, select program. After it programs select verify. After that click reset ECU.

It should be ready to go from there. Save your map before hand, I can imagine it would probably make a mess of whatever you have currently loaded.

triple88a

iTrader: (2)

Hey Travis what do we need to add/adjust when upgrading to the new version?

TravisR

iTrader: (9)

There are a lot of little things that were added like they staggered the turning on of the A/C compressor and the fan compressor. If you are coming from a really early version it could add alot. The download page at adaptronic tells you what each firmware did. That should tell you what new options you have available to you.

Outside of that there isn't anything specific that you need to do. Your current map should work fine, but it needs to be reloaded onto the ECU because firmware upgrades can corrupt data.

triple88a

iTrader: (2)

Gotcha thanks.