EMS4 car wont start
#1
EMS4 car wont start
Hi guys, i am new to the miata. Must say these are amazing little cars.
I currently have stock 1995 motor for setup purposes.
Aem EMS4
Aem 5 bar map sensor
ID 1000cc injectors " but stock are in to get it started"
Aem Air temp
Stock CAS
Stock coils
Currently i cant get the vehicle to start. injectors are firing and coils firing but everything seems to be out of sync.
All that would happen is that the car would swing and sometimes back fire.
I am not sure if i have the coil setup in the map setup right for the stock cam & crank angle setup.
I have uploaded my current base map can some please have a look and see what i have done wrong or provide a base map for a stock motor, stock ignition , stock cam and crank setup.
I currently have stock 1995 motor for setup purposes.
Aem EMS4
Aem 5 bar map sensor
ID 1000cc injectors " but stock are in to get it started"
Aem Air temp
Stock CAS
Stock coils
Currently i cant get the vehicle to start. injectors are firing and coils firing but everything seems to be out of sync.
All that would happen is that the car would swing and sometimes back fire.
I am not sure if i have the coil setup in the map setup right for the stock cam & crank angle setup.
I have uploaded my current base map can some please have a look and see what i have done wrong or provide a base map for a stock motor, stock ignition , stock cam and crank setup.
#2
Hi guys, i am new to the miata. Must say these are amazing little cars.
I currently have stock 1995 motor for setup purposes.
Aem EMS4
Aem 5 bar map sensor
ID 1000cc injectors " but stock are in to get it started"
Aem Air temp
Stock CAS
Stock coils
Currently i cant get the vehicle to start. injectors are firing and coils firing but everything seems to be out of sync.
All that would happen is that the car would swing and sometimes back fire.
I am not sure if i have the coil setup in the map setup right for the stock cam & crank angle setup.
I have uploaded my current base map can some please have a look and see what i have done wrong or provide a base map for a stock motor, stock ignition , stock cam and crank setup.
I currently have stock 1995 motor for setup purposes.
Aem EMS4
Aem 5 bar map sensor
ID 1000cc injectors " but stock are in to get it started"
Aem Air temp
Stock CAS
Stock coils
Currently i cant get the vehicle to start. injectors are firing and coils firing but everything seems to be out of sync.
All that would happen is that the car would swing and sometimes back fire.
I am not sure if i have the coil setup in the map setup right for the stock cam & crank angle setup.
I have uploaded my current base map can some please have a look and see what i have done wrong or provide a base map for a stock motor, stock ignition , stock cam and crank setup.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM