Oil Cooler for DIY'er
10-13-2009, 03:36 PM
#1
Former Vendor
Thread Starter
Join Date: Jun 2006
Location: Bell Tuning & Performance
Posts: 1,337
Total Cats: -99
Oil Cooler for DIY'er
BEGI has made a new line of Oil Coolers. Now released for the DIY'er who can make their own mounting brackets and oil lines. An oil cooler kit will be coming soon.
We've selected a specific configuration that we thought would prove most effective. The 18" refers to tube length, 1.25" is the thickness, and 3.6" is the height of the core. We have selected the long tube style coolers for the exceptional thermal efficiency they offer.
Please note that the smallest cooler offered has an internal flow area equivalent to a 1.07 ID tube. You can extrapolate the internal area of all the others by simple ratios.
The inlet and outlet fittings are your choice. The most popular are NPT threads of either 3/8 or 1/2. Just tell us what you need! If mounting brackets are needed, just send us a sketch. It will add a few extra dollars to the cost, but it is all rather easy.
Every cooler is custom welded together in an artistic and strong manner. It is further deburred and buffed to an attractive finish.
Each cooler is leak tested to 120 psi. Obviously, no leaks allowed.
More info:
http://www.bellengineering.net/produ...roducts_id=484
Stephanie
We've selected a specific configuration that we thought would prove most effective. The 18" refers to tube length, 1.25" is the thickness, and 3.6" is the height of the core. We have selected the long tube style coolers for the exceptional thermal efficiency they offer.
Please note that the smallest cooler offered has an internal flow area equivalent to a 1.07 ID tube. You can extrapolate the internal area of all the others by simple ratios.
The inlet and outlet fittings are your choice. The most popular are NPT threads of either 3/8 or 1/2. Just tell us what you need! If mounting brackets are needed, just send us a sketch. It will add a few extra dollars to the cost, but it is all rather easy.
Every cooler is custom welded together in an artistic and strong manner. It is further deburred and buffed to an attractive finish.
Each cooler is leak tested to 120 psi. Obviously, no leaks allowed.
More info:
http://www.bellengineering.net/produ...roducts_id=484
Stephanie
Last edited by Stephanie Turner; 10-13-2009 at 04:04 PM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
