Traction Bar/Wheel hop eliminator kit?
03-02-2009, 03:46 PM
#3
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,292
Total Cats: 475
Ok, so are you working on this? Couple months ago you said you'd have more info in a few days. Just wondering if I'm gonna have to buy them from someone else or if you're working on something still.
Last edited by patsmx5; 03-02-2009 at 04:03 PM.
Reply
0
0
03-02-2009, 05:50 PM
#4
Well, I am, and I have, but its not done. Mostly because projects are lagging as usaul. So I'm dealing with them.
I can tell you whats in the kit.
Rear lower control arm bushings
Rear differential stabilizer (a serious shot at it)
This will reduce most if not all of the front back movement to a little bit of nothing.
If that doesn't fix you then I have:
Traction bar.
Then...
Rear control arm mount reinforcement.
If that still does not fix it,
new reinforced lower control arm
If you still have wheel hop:
Shocks, springs, and sidewall stiffness.
Professional dragsters have wheel hop, some amount of effort has to be put into controlling your launch through clutch engaugement, and the onset of power. If you don't hit the spring with the hammer it wouldn't be excited in the first place.
I can tell you whats in the kit.
Rear lower control arm bushings
Rear differential stabilizer (a serious shot at it)
This will reduce most if not all of the front back movement to a little bit of nothing.
If that doesn't fix you then I have:
Traction bar.
Then...
Rear control arm mount reinforcement.
If that still does not fix it,
new reinforced lower control arm
If you still have wheel hop:
Shocks, springs, and sidewall stiffness.
Professional dragsters have wheel hop, some amount of effort has to be put into controlling your launch through clutch engaugement, and the onset of power. If you don't hit the spring with the hammer it wouldn't be excited in the first place.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
