my mx-5
01-23-2014, 02:16 PM
#8
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
But if you buy it all together how can you put it together separately? And if it's separate how will you rebuilt it together? I'm not sure I understand your logic.
Reply
0
0
01-23-2014, 03:03 PM
#9
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
You dont have to rebuild the motor but you do need to build the motor if you want to buy all the parts to rebuild the built motor all at once but if you buy them separately then you absolutely must rebuild the motor but the catch is you will not have to build the motor since it will already be built by the rebuild.
Reply
1
1
01-23-2014, 03:05 PM
#10
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
You dont have to rebuild the motor but you do need to build the motor if you want to buy all the parts to rebuild the built motor all at once but if you buy them separately then you absolutely must rebuild the motor but the catch is you will not have to build the motor since it will already be built by the rebuild.
In that case OP, buy it all together.
Reply
0
0
01-24-2014, 03:18 PM
#11
Newb
Thread Starter
Join Date: Jan 2014
Posts: 7
Total Cats: -29
yea I guess it will be better to buy everything toghether and what I ment was if I rebuilt the motor before I put a turbo in and the question was if I should built a turbo with different types of parts or buy it all from one manufacturur
Reply
-2
-2
01-24-2014, 03:33 PM
#12
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
I think most people on this board would just buy a complete turbo rather than try to build one out of parts.
I suppose you could use like a radiator fan as a turbine wheel and build a housing out of fiberglass. The compressor would be tricky through because it has to be tough in order to take the compressor surge. I think you would need to use JB weld for sure.
I suppose you could use like a radiator fan as a turbine wheel and build a housing out of fiberglass. The compressor would be tricky through because it has to be tough in order to take the compressor surge. I think you would need to use JB weld for sure.
Reply
0
0
01-24-2014, 04:47 PM
#15
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
I mean, it's just so bad that I have to believe it's not his native language. If that's the case, then fine you get a pass and we can help, but if not...
So, what'll it be Brian, is English your native language?
So, what'll it be Brian, is English your native language?
Reply
0
0
01-28-2014, 05:39 AM
#20
All-round "Good Guy"
Join Date: Dec 2009
Location: Brisbane, AUSTRALIA
Posts: 992
Total Cats: 245
I suspect OP is up to no good, the thread is titled "my mx-5" but it's clearly NOT my MX-5!
This guy may be in league with Microsoft; I was looking at another guy's computer today and noticed he had a folder labelled "My Documents" but when I looked in there, they weren't my documents either, in fact I'd never seen them before???
This guy may be in league with Microsoft; I was looking at another guy's computer today and noticed he had a folder labelled "My Documents" but when I looked in there, they weren't my documents either, in fact I'd never seen them before???
Reply
0
0
