Aidan's loose oily bunghole actually runs a track lap
#382
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
have you tested to see if it will talk to trackamster "BT GPS service"?
Trackmaster - Welcome
https://play.google.com/store/apps/d...ooth.GPS&hl=en
Trackmaster - Welcome
https://play.google.com/store/apps/d...ooth.GPS&hl=en
#386
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
trust me, that app is soooo worth $4. its not super accurate, even with a 10hz, but its consistent, so you can compare it to past runs. i find its about 0.2 seconds off on a 1:15 lap. the fun part is video with gforce, speed, lap time, etc data. and it has a virtual dyno which ive never really screwed with.
#389
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
it will also call out split times while your driving so you can improve while on course instead of waiting to review the video.
#392
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Alright I might do that. Mobius has some too apparently. Do you have enough to give me a small bottle? I need to pull the head one of these weekends but between midterms and selling my extra smurf I'm running out of town. PM me.
#393
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Picked up a sweet cooling panel
Also did more searching and the oil leak is definitely coming from between the head and block. Ed grabbed the gaskets I need from Mazda, and the machine shop can get my head done in a day on friday. So head will be pulled thursday night, cleaned/surfaced on friday and back on for saturday.
Hopefully will be going to the PRE dyno day next weekend and will get some numbers finally.
Also did more searching and the oil leak is definitely coming from between the head and block. Ed grabbed the gaskets I need from Mazda, and the machine shop can get my head done in a day on friday. So head will be pulled thursday night, cleaned/surfaced on friday and back on for saturday.
Hopefully will be going to the PRE dyno day next weekend and will get some numbers finally.