hi_im_sean

iTrader: (3)

Id prefer a front end loader myself, or a grader I suppose.

sixshooter

iTrader: (12)

Available in Portland. They deliver.
https://www.hercrentals.com/content/...l-loaders.html

aidandj

iTrader: (5)

Best woman alive. Fed me taco bell while swapping an alternator in the napa parking lot.




Ben saved my *** and made the bung welding somewhat passable. (my attempt before this was horrible, i got about 3/4 of the way round then hit like a pocket of nasty oil or something and made a mess)



Added an inspection window for my block today






And started a log manifold. Should be done soon.

Scaxx

"Welding cast aluminum is so much fun, especially when it's oily"

-no one ever

18psi

iTrader: (76)

it's like poking at diarrhea with a stick

aidandj

iTrader: (5)

This is exactly what it was. I made it about 3/4 of the way around, with a decent bead. Then hit a pocket of something and it went to hell. Ground a bunch out and piled filler in there. Going to smooth it out and powdercoat it.

Oh well, life moves on.

aidandj

iTrader: (5)

Snagged an oil pan baffle from a fellow forum member. Cheap insurance. Why not. Make some more power from less windage?

Pistons are still out being coated but after they come back everything goes to the machine shop.

Psyber is an awesome guy and sent me his spare compressor cover. Will probably send it off to get powder coated.

Leafy

iTrader: (1)

Did you not learn from my mistake. At least put an elbow on that port you drilled before you put the engine in the car, since it wont clear the starter.

aidandj

iTrader: (5)

The block is upside down.

Leafy

iTrader: (1)

what the duce

aidandj

iTrader: (5)

Its right behind the alternator.

aidandj

iTrader: (5)

Managed to prop my phone up for a picture of the log manifold i'm building for a friend.

Scaxx

You're making me want to try my hand at manifolds....stahp.

aidandj

iTrader: (5)

You can build one of those for like $100

Scaxx

One of the reasons I feel like doing it haha, on the other hand, that $100 needs to go towards getting my engine running

aidandj

iTrader: (5)

Build one for someone. Charge them $100. Build your own too.

shuiend

iTrader: (24)

It's more like $120, but that's when buying in quantity.

aidandj

iTrader: (5)

I know. But you can also get cheaper flanges and ****. Either way. Not expensive.

aidandj

iTrader: (5)

Spent some more time working on the manifold. It is a hard design. Not excited to make more of these. Lots of small adjustments. Still struggling to get full penetration on the schedule 40 pipe, but get pretty close. Also added gussets where soviets cracked.

ridethecliche

iTrader: (2)

We might have to start calling you tacotaco.