deezums

iTrader: (3)

Why not 11.5" mini cooper turbo rotor? I don't know squat about this stuff, but it looks to be internally vented, ~.5" offset, and I've had many mini wheels on my miata.







Wish I could find that mopar stuff this late at night. I've been using gasoline lol

aidandj

iTrader: (5)

<p>Thats what bbundy runs. Last I checked his setup was just as expensive though. I'll find a link.</p><p>http://forum.miata.net/vb/archive/in.../t-141532.html</p>

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>ive been using chrome exclusively for years, do i need to turn it on or somehting?&nbsp;</p>

deezums

iTrader: (3)

I thought that was 11" non turbo rotors?

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>didnt even think of looking at the tubo lol. that just might work. i had to order the mopar BS from ebay.</p>

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>correct, 280mm</p>

aidandj

iTrader: (5)

<p>Read the link, I'm not sure sean, apparently its not working for me now too.</p>

deezums

iTrader: (3)

I can get you better measurements if you want, I haven't even priced these yet but I bet they can be had cheap.

aidandj

iTrader: (5)

<p>Ok bbundy is running the miata dynapro kit. Not his own making.</p>

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>at one point i do&nbsp;recall(hopefully correctly) he was using a radial kit made for a mini</p>

aidandj

iTrader: (5)

<p>Found it:</p><p>http://www.cardomain.com/ridepost/12...da-miata-mx-5/</p>

hi_im_sean

iTrader: (3)

<p>JCW option sport package&nbsp;rotors, i looked at an 06 SC mini on rockauto. $23</p><p><img src="http://cimg9.ibsrv.net/gimg/www.miataturbo.net-vbulletin/285x400/80-121_34092_dra_ra_p_c3f301ebf476cfc28d7be32575e762a 97078d31a.jpg" title="" /><br /><br />&nbsp;</p>

aidandj

iTrader: (5)

<p>Damn this never sent. Explains why the red are more expensive.</p><p>Black are anodized. Red are powder coated. My paint is already chipping off after a year. I might get them powder coated, if you can do that over the annodization. I also need to get a powder coating kit next time its on sale at harbor freight.</p><p>&nbsp;</p>

deezums

iTrader: (3)

Niice, very nearly 11.75!

Is the offset in the right ballpark? Looks like they'd need 10mm hub spacers, or would you even need to bother?

aidandj

iTrader: (5)

<p>I don't have a miata front rotor handy. What is the offset on the rotor to the hub?</p>

aidandj

iTrader: (5)

<p>Bringing them in would also increase caliper clearance!</p><p>We might need 15x9. Damn it you already have x9's don't you sean.</p>

deezums

iTrader: (3)

I bought this thing right as they went out of production, you can still find them for $40 new every now and again. Best $40 I ever spent.


I don't know if you can powder coat anodize, I wonder if the static would work through the oxide layer? If the powder sticks, I don't see it not holding up in curing. Worst case, lye bath soak it a little.

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>you dont need one handy, thats what rockauto and centric is for. 1.6 rotor</p><p>&nbsp;</p><p><img src="http://cimg3.ibsrv.net/gimg/www.miataturbo.net-vbulletin/262x400/80-121_45034_dra_ra_p_528bc65178286b30ca1245de64b6b61 a8c58b1ff.jpg" title="" /><br />&nbsp;</p><p></p><p>&nbsp;</p><p>dam right i do. and they are the ****</p>

aidandj

iTrader: (5)

<p>According to Bob the mini calipers are actually almost a complete bolt on.</p>

aidandj

iTrader: (5)

<p>$140 for 2 calipers...</p>