Aidan's loose oily bunghole actually runs a track lap
I also want to see his car.</p>
06-22-2015, 08:28 PM
#1667
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
His car is so confusing. I got to see it when he went to KO for a bit of tune tweaking before M@MRLS. It looks exactly as described above, with a side of street car, with a large helping of becauseracecar. It looks very well-worn, but as you look closer you can tell it's also very well-maintained.
Didn't get to watch a dyno pull, but it's pretty awesome anyway.
Didn't get to watch a dyno pull, but it's pretty awesome anyway.
Reply
0
0
06-22-2015, 08:40 PM
#1668
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
My drivers fender just developed the most for awful squeak. Happens at any rev. Sitting in traffic makes me want to kill myself.
Reply
0
0
06-23-2015, 01:22 PM
#1672
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>So now that I have a 6 speed and maybe a 1.8, a motor build is on the horizons. Rough plans are 9.5-10.5 compression. Ebay rods. Whatever front damper I get the cheapest, some sort of trigger wheel. New oil/water pump. Probably some sort of valve train upgrade. I'm going to just start shopping for deals and if something pops up I'll take it. Going to keep my MS, light flywheel. And get some sort of clutch. Right now I'm liking the look of the clutchnet 500ft/lb clutch for less than an FM Stage 9001. Turbo will be some sort of cheap turbo, probably a small holset. And another craptacular home built manifold. All this will be done while I'm still trying to upgrade brakes so it won't be happening anytime soon. Thoughts?</p>
Reply
0
0
06-23-2015, 01:24 PM
#1673
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
<p>
</p><p> </p><p>internet hyperbole, but</p><p> </p><p>get an act, not a clutchnet</p>
</p><p>So now that I have a 6 speed and maybe a 1.8, a motor build is on the horizons. Rough plans are 9.5-10.5 compression. Ebay rods. Whatever front damper I get the cheapest, some sort of trigger wheel. New oil/water pump. Probably some sort of valve train upgrade. I'm going to just start shopping for deals and if something pops up I'll take it. Going to keep my MS, light flywheel. And get some sort of clutch. Right now I'm liking the look of the clutchnet 500ft/lb clutch for less than an FM Stage 9001. Turbo will be some sort of cheap turbo, probably a small holset. And another craptacular home built manifold. All this will be done while I'm still trying to upgrade brakes so it won't be happening anytime soon. Thoughts?</p><p>
Reply
0
0
06-23-2015, 01:28 PM
#1675
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
<p></p><p> </p><p>general statement is general.</p><p>you know act makes more than 1 clutch right? so what are we talking about?</p><p> </p><p>also, it doesnt matter how cheap it is if it doesnt stay in one piece. and clutchs arnt exactly a lift the hood and have at it affair. something about having to remove the tranny or some **** to R/R... why am i explaining this to you? you know better.</p><p> </p><p>but like i said, its just what ive read here (with pics to justify)</p>
Reply
0
0
06-23-2015, 01:33 PM
#1677
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Hmmm, thought I had heard decent things about clutchnet. Arent they the ones that make the FM clutches?</p><p>And I've been doing a lot of reading other places and 8.5 comp is pretty low nowadays for a turbo build. With good fueling and proper engine management you can make higher comp work just fine. Plus as we get more access to E85 it just gives me even more ways to make better power.</p><p>Yank is running a high comp+EFR FE3 build and is loving it. Way more lowend and better spool. I don't want to go such high comp that I have to run E85 full time but I want more than just an old 8.6:1 build.</p>
Reply
0
0
06-23-2015, 01:35 PM
#1678
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
That's the point... if you run somewhere in the between 9 and 11:1, it's a compromise. For turbo on pump you want to be just below 9. On E85 you want to be well over 10 or even 11.
Mine is either 8.6 or 9:1. I'd still make more power on E85, but on pump it's a good place to be.
Mine is either 8.6 or 9:1. I'd still make more power on E85, but on pump it's a good place to be.
Reply
0
0
06-23-2015, 01:39 PM
#1679
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p></p><p>Basically spending some time talking to some of my BMW buddies and others 8.6:1 compression is "so last year". You can run higher compression on pump gas because of how much aftermarket engine management has improved. Especially with a good knock sensor. Its going to be a lot more research but from what I've read other places 10:1 on pump gas works just fine with good intercooling, fueling, and maybe some water/meth.</p>
Reply
0
0
