aidandj

iTrader: (5)

I do need to find the 99/00 ABS wiring, and figure out where I am going to mount the computer and stuff. I also need to find some 1/8npt to miata hardline size adapters. Going to make a list and just go to my local hydraulic supply they are always awesome.

@codrus I'm going to come bug you in your old build thread after I look at my fuse configuration and what-not tonight.

Leafy

iTrader: (1)

why that stuff?

aidandj

iTrader: (5)

Line lock bruh.

Haven't seen it yet, but according to monk the harness between the abs pump and the abs computer was mutilated by some other *******. So I have to reconnect everything.

codrus

The one I took out of the donor was moderately a pain, and it was up on a lift with the entire drivetrain and both subframes removed. Putting it in with the engine and tranny in the car? *shudder*.

--Ian

Monk

iTrader: (3)

I'm not sure what the best location for the computer is in your case, but I removed the bracket and everything for the pump.
Unless the shelf is drastically different from NA to NB, mounting it should be super easy.
Just use the hardlines from the prop valve to figure out where the pump sits.

aidandj

iTrader: (5)

I know leafy had to mangle his bracket to get it to work. I need to fit my FPR and catch can in that space too. Though I might move the FPR and flex fuel sensor somewhere else.

codrus

For 99/00 wiring diagram, see here:

http://www.mellens.net/mazda/mazda_m...999_wiring.pdf

Fig 3 appears to be the ABS stuff. More wires than the '03 system I put in my car because of the separate ABS computer.

As far as fuses go, there are three things to power:

- the ABS computer, 10A from the fusebox under the dash
- the ABS valve body, 20A from the fusebox in the engine bay
- the ABS pump, "fusible link" of unspecified amperage.

I used a 50A fuse for the "fusible link", it's the big-*** red one wrapped in electrical tape that you can see in the photo above.

--Ian

aidandj

iTrader: (5)

Thanks Ian. Which one disables ABS?

Have an extra foglight switch I could use.

aidandj

iTrader: (5)

Still got extra pins Ian? (From your other thread?)

codrus

I still have extra pins, but I have no idea if the connector on the NA instrument cluster is the same as the NB one.

I put a switch on the power line to the ABS computer so I can disable it. It's the lowest current and seemed like the one that's least likely to do something weird if it's not working.

--Ian

aidandj

iTrader: (5)

Anyone know where to get M10x1 inverted flare to 1/8NPT for cheaper than these guys?

1/8" NPT Male to M10-1.0 Female Inverted Flare Adapter Fitting (DIY-A-1/8NPT-M10)r

aidandj

iTrader: (5)

TSE has them for $19 for the pair. I think I'll be getting them there.

aidandj

iTrader: (5)

Annnnd UPS ground is $10 for those 2 little things. Unless andrew can ships USPS I can't stomach that.

OneTwo

iTrader: (2)

This is what happens once Amazon Prime ruins your life. You have to wait, AND it costs money.

aidandj

iTrader: (5)

Want to pick a set up for me and snail mail it up here

(I have no idea where you live)

turbofan

iTrader: (1)

Aidan you crack me up. "want to spend an undetermined amount of your time (likely no less than a half hour though) to pick something up, pay for it, and mail it, so I can save less than $10?"

aidandj

iTrader: (5)

Hence the winky face, and the expectation that it wont actually happen

It mostly saddens me that I have to pay $10 for something that can be shipped with $.69 of postage. Oh well, life goes on.

OneTwo

iTrader: (2)

Too far for me brah. Train some carrier pigeons to do your bidding.

Savington

iTrader: (31)

It mostly saddens me that people think that for $0.69, the USPS won't tear them out of the package, causing the customer to complain, email/call me asking where the parts are and why a tracking number wasn't included, and then when the tattered envelope shows up, they'll call and insist that I overnight them a replacement pair because "I should have packed them better"

hi_im_sean

iTrader: (3)

AutoMeter Metric Adapters 2265 - Free Shipping on Orders Over $99 at Summit Racing <---edit this one is backwards, its not the droid you are looking for

Bosch Metric Adapter Kits FST-7573 - Free Shipping on Orders Over $99 at Summit Racing