Blaen's because 350hp build
03-12-2013, 01:37 PM
#101
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
Actually, it's exactly what I want Tim.
I just have to get the preload /exactly/ right to be able to run it, and it's perfect once I have it right.
Logs hopefully coming soon for the 4828's spool!
I just have to get the preload /exactly/ right to be able to run it, and it's perfect once I have it right.
Logs hopefully coming soon for the 4828's spool!
Reply
0
0
03-12-2013, 03:09 PM
#103
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
But I need to sort out this wastegate before I can put on EBC - puttong on EBC when the wastegate is an unknown is retarded.
Reply
0
0
) off of EBC.
03-26-2013, 10:02 PM
#111
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
Because I've been busy as **** with finals, installing a MS3, you name it.
Here's two sets of logs, completely untuned as I'm running the basemap with a quick autotune, and running off the wastegate in the worst possible configuration for boost.
Performance is everywhere, because I suck *** as a driver. 162kpa (Remember, at my altitude default kpa is like ~95) by 3030 in fourth was the best I could do - I'm certain most people here could get better results. I would imagine an EBC, when I get it working, will drastically change it for the better based simply on the very obvious boost taper from the wastegate in the logs.
Here's two sets of logs, completely untuned as I'm running the basemap with a quick autotune, and running off the wastegate in the worst possible configuration for boost.
Performance is everywhere, because I suck *** as a driver. 162kpa (Remember, at my altitude default kpa is like ~95) by 3030 in fourth was the best I could do - I'm certain most people here could get better results. I would imagine an EBC, when I get it working, will drastically change it for the better based simply on the very obvious boost taper from the wastegate in the logs.
Last edited by blaen99; 03-27-2013 at 01:16 AM.
Reply
0
0
03-27-2013, 01:44 PM
#119
https://www.miataturbo.net/megasquir...aaaaalp-71822/
Time stamped at 1:32 PM. Your 15 minutes is running out. According to the clock on my computer you have approximately 7 minutes left to post a virtual dyno.
I feel that a failure to comply should result in the BANHAMMER fae style!
Reply
0
0
03-27-2013, 01:46 PM
#120
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
You have officially confirmed your understanding of the correct wiring here:
https://www.miataturbo.net/megasquir...aaaaalp-71822/
Time stamped at 1:32 PM. Your 15 minutes is running out. According to the clock on my computer you have approximately 7 minutes left to post a virtual dyno.
I feel that a failure to comply should result in the BANHAMMER fae style!
https://www.miataturbo.net/megasquir...aaaaalp-71822/
Time stamped at 1:32 PM. Your 15 minutes is running out. According to the clock on my computer you have approximately 7 minutes left to post a virtual dyno.
I feel that a failure to comply should result in the BANHAMMER fae style!
Reply
0
0
