Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!
#2104
Buy these: http://www.racetronix.biz/itemdesc.a...114212&eq=&Tp=
#2110
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
And Fae, take a few minutes to read this thread:
http://forums.nasioc.com/forums/show....php?t=2294126
at some point the top dogs of subaru tuning start discussing exactly what you're doing: compensating for lack of fueling with meth injection.
The conclusion: if you're running out of injector/pump, get more injector/pump. Otherwise you are on your way to epic failure.
Seriously. Read it.
Yeah. My shi does have failsafes and I would drop to wastegate pressure if it flows too much or too little or water level is low. Um I would prefer to have enough gas injector though. Sigh
OK so who thinks I should run 90psi base pressure then. The regulator apparently is rated for 100psi.
I think 18psi covered this for you.
Buy these: http://www.racetronix.biz/itemdesc.a...114212&eq=&Tp=
Buy these: http://www.racetronix.biz/itemdesc.a...114212&eq=&Tp=
I like. 2600cc of semen per cylinder!
#2116
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Imma about to pour meth in my juice tank. Here is my tuning strategy.
Tune gas to 11.7:1 ish.
Add meth on top of gas and tune to 10.3:1 ish.
4x direct Port nuzzles
1x big ic outlet nuzzle
1x big pre turbo compressor nuzzle.
Should be enough meth everywhere to explode my inyake, compressor, ic piping, ic, and intake on a backfire.