blaen99

iTrader: (6)

If you can fit the N/A rx7 tranny, you can fit the turbo RX7 tranny. Mounting and connections are virtually identical. Go to it boy.

P.S. The t2 trannys are reputed to hold 650rwhp on a rotary. That enough for you Faefae? 550 rwhp is a known, there's at least 2 guys I know of reporting (non-drag) 650rwhp holding on theirs.

chpmnsws6

iTrader: (12)

And a decent scooter can make over 350rwhp. I've also had to replace a few in buddies cars after trying to find a source for parts, let alone upgrades. One with a dead 3rd gear, and another with a dead 5th. Parts for the American transmissions can be found in any auto parts catalog, and upgrades are in any Jegs or Summit.

No on the glide- Auto will make his boring car even more boring. Nothing like running single digit times while holding a cup of coffee. After the launch its just like your just driving to the grocery store.

vehicular

iTrader: (3)

The only way a T5 will hold big power is with an aftermarket gear set, and by the time you buy everything and have the trans built, you might as well quit messing around and buy a big boy trans. Built T5s are great when you're dropping them into places that they just drop into. If there's fab work involved, it seems really silly to use a built T5 when an off the shelf trans would cost you the same amount of money and take the same amount of effort, and a spare trans is just a phone call to D&D/ REV/ trans shop of choice away.

That said, if I can come up with a spare Turbo2/ FD trans to take measurements off of, I really will make adapter plates.

Faeflora

iTrader: (2)

Yes, I can get a turbo2 trans.

Vashthestampede

iTrader: (17)

See post #2589

Please do not look for a BEGI solution. That will only prolong this carnival another 4 years.

Eventually, after you've thrown enough money at it, you'll get it to work. For a little while at least. lol

I agree that you should just take it to the dyno and do a 5th gear pull. See wtf kind of power it's making and then you'll know your options. Bro.

stefanst

iTrader: (1)

Second on the Getrag 265. I had it on a Turbo BMW 535 (Alpina B7 Turbo) and it handled 600nm / 360hp for over 150K miles. Some guys over at the E28 forum run them at over 600hp.

And it's cheap and shifts nicely. How to make it fit I dunno....

sixshooter

iTrader: (12)

Why deny the bellhousing exists to bolt half a dozen real transmissions to your engine? You can't break most of them.

http://www.jegs.com/i/Quick-Time-Bel...ductId=1293712



Quick Time BellHousing #698-RM-4097
Bellhousing
Engine: Mazda Miata B6/BP
Trans: Muncie, Jerico, Richmond, Saginaw, Bert, 4-5 Speed, Chev TKO 500-600 Transmissions. For use with OE Miata clutches.
SFI Certified 6.1


$599.99

18psi

iTrader: (76)

GET THAT!! for realz

Faeflora

iTrader: (2)

W
W
W
W


WHAT THE DUUUCK

why am nobody use this????????

Sxshooter i will suck your ******* for recomending this!!!!!

My boner is strong. That blhousing look like soenthing i can stick m weinis into

Please.

Drawbacks?????????

rleete

iTrader: (21)

It's 600 bucks!

bikersam717

iTrader: (5)

Its not vegan or sawzall friendly.

Faeflora

iTrader: (2)

Lick my juicy little cunny. So was that fukkn mazdaspeed trans i just kerploodied in a regular ol 3-4 shift.

I know jack about Muncie, Jerico, Richmond, Saginaw, Bert, 4-5 Speed, Chev TKO 500-600 Transmissions but they can't be more than $1000. Right?

Which one is most baller and super slick. I need to be able to flat shift at 8500 RPM while I am sucking my own dong and ballin hard at 40psi. 600+ft lb tq capable is necessary. If I sexplode my motor I may go turbo LS like that fukkn swapped turbo'd god on m.net

rleete

iTrader: (21)

Sorry, I really don't know ---- about transmissions.

pdexta

iTrader: (17)

Just get another stock 6 speed!

TurboTim

iTrader: (9)

They are all baller and will all be more than $1000 new. Perhaps you can find something gently used for cheap. yellowbullet.com?

generally straight cut gear and/or dog boxes (square lugs replace syncronizers) will be less money and stronger at the expense of noise and poor streetability.

"For use with miata OE clutches"??? with a disc that matches the trans input shaft.......

A PPF/rear diff support, shifter location, driveshaft, speedo cable, crossmember solution will need to be created. None exist to my knowledge except for maybe the Martin/Monster Miata for the T5's and V8R/FM for the T56 if the trans happens to be in the same spot as the appropriate V8 in those kits. And umm...those aren't cheap either. I don't know if the T5 or T56 would work with that quicktime bellhousing...I think it would. If not I am sure they will make you one that does for the same price if you call and ask nicely. So yeah that's why no one vocal is using it when the Grade A players here are fine with the 6speed.


Honestly that's what I would do. Quickest & easiest by far. Maybe develop some mechanical empathy.

triple88a

iTrader: (2)

^, the more gears available to strip, the more gears you'll be able to strip.

kaisersoze

iTrader: (8)

Either get a supply of 6 speeds or if you aren't going to go ***** out for a TKO setup then you could try these. . . I didn't say they were cheap though. Never heard of these guys either.
http://www.cpboost.com/Mazda-MX5-Mia...zmx56mtseg.htm

jacob300zx

That bellhousing with a tko600, pay brain to install everything and have the ppf modified.

Faeflora

iTrader: (2)

Fukkc. You.

$5000 of NO.

This is not an evo forum and iam not making evo powre. :realistic:

Bryce

iTrader: (24)

Yo Fae, what are you going to do?