Aidan's loose oily bunghole actually runs a track lap
#4204
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Well now that you guys bought all of them, the cheapest 2' one I can find on Amazon is $47 and its no longer Prime.
Thermo-Tec also seems to make one, also 6" wide.
http://www.thermotec.com/products/11...at-shield.html
Thermo-Tec also seems to make one, also 6" wide.
http://www.thermotec.com/products/11...at-shield.html
Last edited by EO2K; 09-28-2015 at 12:46 AM. Reason: I suck at maths
#4207
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
I need something to keep my downpipe from melting my master cylinder so I may have one of these on my shopping list shortly.
**** I suck at math
Ordering this: because I realized how retarded I am.
**** I suck at math
Ordering this: because I realized how retarded I am.
Last edited by EO2K; 09-28-2015 at 12:50 AM.
#4210
Just my opinion, but if the transmission oil is literally toasted as mentioned, then yes it should have been changed. But that tells me the transmission is getting way too hot, so to me the real solution is to fix the overheating problem and then the oil will last much longer.
Welding looks weldy.
Welding looks weldy.
I use Redline MT-90, I've done a Blackstone UOA on it after 3 or 4 track days and it's been fine.
--Ian
#4211
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
2 of those are ordered. Will install tuesday.
Guess that means its still not getting off jackstands. I'm pretty much going to drop it off them tuesday night, then drive wednesday morning.
Guess that means its still not getting off jackstands. I'm pretty much going to drop it off them tuesday night, then drive wednesday morning.
#4212
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
List is down to 3 things.
Reseal/refill diff.
Install exhaust heat shield.
Pack.
I installed a new USB outlet in the center console, so now I have 4 total. And also hardwired my V1 in a little better.
Also need to clean my engine bay. Ed's exterior is flawless, but his engine bay is disgusting. I will be the opposite and combined we will have 1 decent looking car.
Reseal/refill diff.
Install exhaust heat shield.
Pack.
I installed a new USB outlet in the center console, so now I have 4 total. And also hardwired my V1 in a little better.
Also need to clean my engine bay. Ed's exterior is flawless, but his engine bay is disgusting. I will be the opposite and combined we will have 1 decent looking car.
#4214
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Thats really odd. I haven't heard of that anywhere else.
I use too much force on everything anyways so it didn't really bother me. I'm sure I'll break one sooner or later.
I use too much force on everything anyways so it didn't really bother me. I'm sure I'll break one sooner or later.