shuiend

iTrader: (24)

Here is one. It is on the high side price wise though. I will go back through my wiring again tomorrow and see if I missed it first time through.

g_reichow

iTrader: (2)

I bought one from VitaminD on this forum, for some reason I think he has more.

-Greer

g_reichow

iTrader: (2)

Also check ballenger, I think they are Sumitomo or Kostals?

Ballenger Motorsports - High Performance Electronics

Home » Shop » Connectors / Harnesses » Sumitomo » Mate to Sumitomo 3 way TS Plug Housing for TPS & Boost Sensors - Mates to 90980-10845

Home » Shop » Connectors / Harnesses » Sumitomo » Sumitomo MT 3 way Plug Housing 6189-0027 (Connector ONLY)

http://www.bmotorsports.com/shop/pro...oducts_id/1707
pigtail version.

Ballenger has a 15 buck min so order some crimps or something to bulk up to 15, or face a 3 buck "service" fee. Quick shipping from Richmond, VA.

you may have to measure but that should get you close. You'll also need a crimper and some pins but that is the easy part.

-Greer

GraemeD

iTrader: (1)

I have a hacked up 2001 harness, if it is the same plug, it should be still there. You can have it if it will work, send me a photo of the tps that it mates to and I will check.

Graeme,
Golden, CO

hustler

iTrader: (6)

I like to support my peeps whenever possible, but I want this car running in it's true form by the time my magical computer comes in so all I have to jack with is wiring. Sorry I couldn't give you my cash. I guess I now have an exhaust cam-gear to play with.

If it's any consolation, there is a Supermiata wing (pronounced wahng) and another set of wheels in my future. After that, it will be a cold day in hell before another Miata vendor of any type sees another dollar from me. I have a kitty to feed. well...after the damper of course.

shuiend

iTrader: (24)

Here is a link to the 01 wiring diagram. The TPS is on page 3. That should help you figure out if you have what he needs. The 99 and 01 should have the same plugs. I just quickly checked both wiring diagrams and they have the same colors.

GraemeD

iTrader: (1)

I just looked, and that's the one I have. Send me a PM and I will get on it's way.

hustler

iTrader: (6)

Thanks dude, here is a pic of the connector:

I believe it is on the fuel injector harness, not certain though. There are several 3-plug connectors on that harness. You can probably look at the wire colors and get it right. I owe you, big time.

shuiend

iTrader: (24)

So I guess I should resend out those 2 pigtails that failed to get to you earlier.

hustler

iTrader: (6)

****, I just realized that I need a 99 cam sensor piggy and the crank sensor piggy. Yes, please send them. This failed shipment included that right?

hustler

iTrader: (6)

Both of you guys send me your paypal addies with shipping costs. I'll make it worth your time.


On an unrelated note, I believe that vacuum hose is cracked.

Edit:
If anyone needs a water/alternator belt number, consult my pictaurs.

hustler

iTrader: (6)

Okay, I'm having serious mental problems right now. I'm starting to think I know how to set-up the CKP/CMP on this car using the TSE wheel and my single tooth CMP:

I'm using a 12-1 w/ -1 @ 60*BTDC, that's done.

My CMP is a modded CAS that only has one tooth in it now I'm guessing I can reposition that wheel into the 30* CKP missing tooth window and then the car will run like magic, right?

How do I check my work without blowing-up the car?

No one has cam wheels for at least a month so I want to try to save myself a ****-ton of money and make this set-up work.

Thoughts on my stupidity?

soviet

iTrader: (10)

the only requirement for cam tooth position, is that its *before* the crank missing tooth. anywhere before. MS manual suggests the ideal spot is about 60-30* before, but anywhere is fine.

the cam tooth is the "yo crankshaft missing tooth is coming up soon" signal for the ECU.

Braineack

iTrader: (62)

omfg, three slim spade connectors and one small tube of expoy and this could have been solved a long time agao.


flood clear mode + composite logging the triggers

hustler

iTrader: (6)

Explain.

Thanks, baller.

hustler

iTrader: (6)

Does this mean I have a 15* window for the CMP? That's going to be touch to build.

Why does everything I read in the manual say the CMP has to drop in the missing-tooth area?

Leafy

iTrader: (1)

Sounds like something Fae would do.

Braineack

iTrader: (62)

ive done it.

soviet

iTrader: (10)

No, that means you have a 360* window for the CMP.
Just wait a day I'll confirm that my **** works then I'll post a picture of what teeth to cut off.

pusha

iTrader: (5)

man, OP's fingernails are ******* gross