jtothawhat is about to bust a 1.6
#470
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
probably only makes 50 ftlbs till 5500 when it starts to spool, then jump 500ft lbs in 500rpm. lol
interested in seeing it. this cars been in the build stages in the same amount of time I built my Miata, parted it out and have been out of a Miata for 5 years. :P
interested in seeing it. this cars been in the build stages in the same amount of time I built my Miata, parted it out and have been out of a Miata for 5 years. :P
#474
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Chicagoland
Posts: 1,376
Total Cats: 4
UPDATE!!!!!!
Car's on dyno now, they're tuning still but so far revving to 7,000 RPM made 365 whp on a Mustang Dyno off the wastegate spring only roughly 16 pounds of boost with the power still rising. The tuner said 8,200-8,500 should be about where the power will drop off. He's estimating 375-ish whp off the wastegate, 550 whp with higher boost levels, the turbo is limiting factor.
Will post videos/dyno sheets once I get them.
Car's on dyno now, they're tuning still but so far revving to 7,000 RPM made 365 whp on a Mustang Dyno off the wastegate spring only roughly 16 pounds of boost with the power still rising. The tuner said 8,200-8,500 should be about where the power will drop off. He's estimating 375-ish whp off the wastegate, 550 whp with higher boost levels, the turbo is limiting factor.
Will post videos/dyno sheets once I get them.
#477
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680