shuiend

iTrader: (24)

So I have been happily boosted since fall of 2007 running a BEGI S1 kit with an SR20 T25. At about 9 PSI I was making 200hp and 200 ft/lbs of Torque with the following dyno.



I was extremely happy with those numbers, but I wanted my car to become a track *****. After all the people complaining about studs stretching I knew that V-Bands will be in my future. Unfortunately to have fun with V-Bands you will be pushing at least a Disco Potato to 15PSI, which makes stock motors go BOOOOOM. So I decided time to build a motor and get that out of the way before I send Tim my bank account numbers so I can have some Absurdflow GODLINESS.

The plan for the built motor is something that would reliably run 350hp on the track and not blow up. I honestly never plan on running above about 250hp, but I wanted the headroom for the safety margin.

The block is from a 94 which brgracer hooked me up with. The crank is from an 01 motor that I got from Y8S I decided that I would go with a VVT head to eak out a little more power after seeing what Y8S got on his motor with it. I choose to go with a 99 IM with VICS because from what I have read it flows a bit better then the 01+ IM. I will also be upgrading to a 2870 ChinaCharger for the time being until I can afford a real Disco Potato

For engine management I will be running MegaSquirt 3 in standalone with Kevin's VVT controller. My car will be getting tuned by Jerry down at DIYAutoTune and I will be shooting for 300hp at the wheels at around 20PSI, or whatever power I make around 20psi.

Parts List
M-Tuned Rods
Supertech 8.6:1 Forged pistons 84 mm
Billet oil pump gears
01 VVT Head
99 IM
Mazda Comp Motor Mounts
Coolant Reroute - using Begi Space and Kia water neck
2870 ChinaCharger
FM stage 2 clutch
6 speed

Now for the fun part pictures of everything

Bare Block after Overbore and Hone


Pistons assembled on Rods


Installed Rods and Pistons



SR20 T25 VS 2870 ChinaCharger




Head Installed


Coolant Reroute - I actually took out the port facing straight down as it would hit the Trans


Rough mock up of turbo installed and ran lines


Modified VVT Valve Cover to Fit Toyota Cops Looks horrible but is functional


All the parts removed before engine was pulled


Old engine and 6 speed being pulled


Engine building work bench

shuiend

iTrader: (24)

Coolant Reroute Complete


FM2 Clutch and Pressure Plate


6 Speed attached to engine


Me installing ****


Random Engine bay shots

shuiend

iTrader: (24)

So far left to do on the install is to install my new LC-1, fill with oil and coolant, and then start the car. Hopefully tonight I get it started and engine broken in.

Here is the link to where all my pictures are hosted at. There are definitely more there then what I have posted so far.

Here is a spreadsheet of most of the parts I have boughten and how much it cost me. Don't look at this if you don't want to see large sums of money spent.

I will get up some completed pictures tonight and hopefully get a video of it running. I am praying that it all works and I didn't **** anything up.

I want to say thanks a lot to neogenesis2004 for helping put the motor together and Braineack for helping me get the engine back installed.

Braineack

iTrader: (62)

secret to the success:

dgmorr

iTrader: (4)

Can you post the part numbers for the COPs you used? I thought I read the standard DIY Toyota COP part numbers didn't fit the 01+ head.

shuiend

iTrader: (24)

They standard cops do not fit the Valve Cover. That is why I grinded down the stubs in the VC and I also cut up my COPS. I will post some pics of what had to be done to the cops tomorrow.

neogenesis2004

iTrader: (12)

I should be a hand model.

dgmorr

iTrader: (4)

So it's just the stubs that get in the way and not the bore diameter of the plug holes?

Thanks

y8s

iTrader: (8)

bore diameter. cops are .956 diameter and bore holes are about .936.

of course the flange on the COP is larger in diameter than the spark plug well trough in the valve cover.

and the mounting ears on the COPS hit various things

etc

etc

etc

Braineack

iTrader: (62)

I'm just happy I convinced Shueinds to put the heater core exit on the lower rad hose.

shuiend

iTrader: (24)

Yah except that is where I have a coolant leak. I need to fix that tonight and actually get the car started.

Braineack

iTrader: (62)

oh yeah, i didnt tighten those clamps...so you could rotate the fitting as needed.

NA6C-Guy

iTrader: (1)

Good looking build. Coming together nicely. That 2870 really looks like a beast next to the old turbo.

Maybe one day I won't be so ******* poor and can start on some kind of actual turbo related build.

Braineack

iTrader: (62)

also notice how my pictures are so much better than his.

shuiend

iTrader: (24)

I am sorry that I spend all my money on MOAR BOOST instead of expensive *** cameras.

rider384

iTrader: (3)

The answer to taking better pictures is MOAR BOOST.

owengt

are the 6 speed boxes from limited versions of the mx5 or another mazda and an adapter plate to suit or is if off something else and just happens to pop straight on.

ScottFW

iTrader: (4)

Good job Lars. Looks like it's coming together nicely.

webby459

iTrader: (8)

Nice stuffs, Lars. Looking forward to how you make out with the VVT, please follow up with that AND with what your final COPS fitment looks like.

You will reach those power goals with no problem, will not need 20psi to make 300 wheel, I says.

shuiend

iTrader: (24)

In the US the 6 speed was an option on the 99+ models and it is a direct bolt on except for 1 starter bolt.

How about you come over tonight with your vband stuff and we try it out on my car and I will let you know what type of numbers it puts down. I will also throw in a drill bit and tap for you.

August 2nd is my scheduled date to get tuned down at DIYAutotune so a graph should be up sometime that afternoon with what I am making. I am thinking most likely I will end up maxing out the injectors and that will be what holds me back. Unfortunately on the 99 IM reinstalling injectors is a bitch so I won't be switching to bigger ones any time soon.