wildfire0310

iTrader: (1)

Ok so I figured I post this over here.

Jan 15::

ok so I guess I will finally get around to start this. Been storing parts for about a year now...

So the little 1.6 in my car is finally starting to die so I am swaping to a 1.8.

Block:

99-00 short block (Thanks to Ben for hooking me up back when he was at MazMart





94-97 head (Thanks to Stephen)



a box of parts



So I still missing a few parts and plan to grab them in the next few weeks. I am planning for a swap either over the weekend of the 31st or 7th.

oh yea.







Jan 17

So i went to the pull a part today and grabed a valve cover off a ford and the little oil filter bolt, since my block didnt' have one.

here is the valve cover all dirty.



I have already cleaned, and started to prep it for the car. It is sitting in the garage right now with the second coat of paint. I also got the intake manifold all painted also.



As for the turbo. While working on it, I figured I would get the specs. So with some quick goggling and some help from Braineak. Got to love how MT.net comes up in goggle search.

The turbo is originally for a Pontiac Sunbird
55 tirm,
30 lb/min
specs out for a 250-270 turbo but some quick reading show that the exhaust housing is the weak point and I should be able to max out at 200-220 on this turbo. Not back for a small turbo that will spool by just looking at it.

Still have a list of little parts to find, but I got 99% if the big parts. Oh the gasket kit is ordered and on it way. Should be here by the end of new week or start of next week.

Jan 20

so I have some photos of the valve cover at 80% done



I still need to clean up the silver areas better. With the chrome VC bolts it should be just enough bling for my taste.

ah two steps forward and well two steps backwards.

I got the FM adapter mounted up today. That took a few quick trips to my favorite auto parts store..Home Depot

Did a quick mock up of what I have here:





Starting to look sexy I also picked up a piece of 26ga metal to make some kinda heat shield.


Then noticed a nice little issue



The only good new is that I was already planing on picking up a small box of nuts and washer to use for bolting the Intake and exhaust manifold already, so now I just need to either find 4 longer studs or just pick up 4 bolts.

Slowly she is coming together,

wildfire0310

iTrader: (1)

OK so new update for today.

So with a little push from Eric I jump on a (Kinda) BINB 38mm Tial wastegate for $5 more then my turbo





There is only two issues with it and why I used kinda. One the brass fittings were in the box.. So I have to go out and replace them and two the old owner couldn't read lol, and its a .7 bar spring not a 7 pound spring.

All in all for the stupid price I got the thing for, i can't complain.

cueball1

iTrader: (13)

This is going to be an interesting build as the block and head are the oposite of convention. Most people are using the 99/00 head with a 94/95 block. I'm all for bucking conventional wisdom!

ooooh. Shiny parts....

wildfire0310

iTrader: (1)

Yea it completely backwards but so far including the motor and turbo parts I am at about $1000 total.

18psi

iTrader: (76)

cant beat that price

mazda/nissan

iTrader: (2)

thats what I thought. I was confused for a minute and thought I was pricing the wrong damned things. That turbo is minuscule btw. Nice IM

wildfire0310

iTrader: (1)

So with the help of Ben91 I got the car running. it is still massively ghetto but its running.







the car still has a lot of work. I need to go pick up an old greddy intercooler kit. That will be the start of my intercooler kit. The biggest issue with the car is that motor is stupid lean or stupid rich. Right now I have it running stupid rich cause when it was lean, it was so lean it was stalling. Thanks to Ben for figuring out the issues and the solution.

I need to start building my megasquirts and get larger injectors. Right now when just running the open downpipe, I was hitting 5psi in 2nd gear at around 2K. The stock ecu couldn't handle it. The turbo has some crazy spool. The best part is the EBC isn't hooked up yet either.

wildfire0310

iTrader: (1)

update:

I finally got my tax return and went to DIY today. I don't remember who I talked to, wasn't Jerry I know that, maybe Matt. Either way, they were great. I came in with an x amount of money and worked with me to get me everything I could for that amount.

So I am now the proud owner of a wideband(finally) and an MS-1 v3 that needs to be built. I still need to get some more parts but this is finally a start.

gospeed81

iTrader: (51)

Nice looking, and CHEAP!, build.

Proper engine management FTW.

wildfire0310

iTrader: (1)

Cheap is the key word for this build. It amazes some of the locals how little money I have in this build. Once I get the megasquirts in and learn everything. I should have a swapped turboed miata for less then the cost of buying a Begi or FM turbo kit. Low budget projects are great, just racked with small problems lol

levnubhin

iTrader: (30)

DUUUUDE, you couldn't clean the engine bay while the motor way out? Looks good otherwise.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Ben

iTrader: (33)

Well that's awesome news. Plus it's easier on me if you don't have to borrow my LM1.

Hook that wideband up ASAP *****.

m2cupcar

iTrader: (5)

wb + ms = <----you

wildfire0310

iTrader: (1)

yea I think about that every time also... Kinda one of those swapped over a weekend in a hurry.

wildfire0310

iTrader: (1)

So I just hooked up my WB today, now that it finally stopped raining for a few hours.

So for anyone that remember all my issues from this post https://www.miataturbo.net/forum/t33162/

I have confirmed what I believed. Now to figure out why. My idle is still all bouncing, either 800 or 1500(it bounces on its own) but at 800rpm my AFR are 22.1 and at 1500rpm I am getting between 18.3-18.9. Mmm wonder if I am running lean lol