Twails Turbo Build
#1
Twails Turbo Build
For the last 6 months or so, I've been researching and collecting parts to turbo my 91 1600.
And at long last I think I might have actually got all the parts together. But I'm sure I've forgotten one or two things.
But anyways, the spec for it so far is;
Megasquirt pnp, in and running.
550cc RX7 injectors, in and running.
Lc-1 Wideband, in and running.
Garreth T25 from an s13
Cast manifold, with t25 flange welded on.
Gizzmo boost controller
Intercooler + piping
I even went and bought a little laptop for in car tuning.
I'll put up some pics as I go along. Hope to get started at it this week.
Here's the car in question. Not to the style that would be universally accepted on here, but in Ireland, this is what were at!
And at long last I think I might have actually got all the parts together. But I'm sure I've forgotten one or two things.
But anyways, the spec for it so far is;
Megasquirt pnp, in and running.
550cc RX7 injectors, in and running.
Lc-1 Wideband, in and running.
Garreth T25 from an s13
Cast manifold, with t25 flange welded on.
Gizzmo boost controller
Intercooler + piping
I even went and bought a little laptop for in car tuning.
I'll put up some pics as I go along. Hope to get started at it this week.
Here's the car in question. Not to the style that would be universally accepted on here, but in Ireland, this is what were at!
Last edited by twail; 01-03-2011 at 07:13 AM.
#13
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
You can do it with a MBC and EBC easy. I did that for a while, even now I can go from wastegate to EBC. but the code for EBC in MS1 is open loop only, so it's not great.
With the flip of the switch, here are my two levels of power:
With the flip of the switch, here are my two levels of power: