ReallyRottenTurbo

iTrader: (1)

Since I will be doing quite a bit of work on the MSM this summer I figured I'd get a build thread going. I'll start off by listing what has been done so far.

Step # 1: Bought a stock 04 MSM.



Step # 2: Insert larger intercooler


Step # 3: Boost Gauge

Step # 4: 2.5 Turbo Back Exhaust (side pipe out of drivers side)... Photos to come.

Step # 5: Insert Roll Bar (M2)



Step # 6: 225/45ZR-15 Toyo Proxies on TRMotorsport C1 Wheels. Tien Lowering Springs.



Step #7: Minor detailing (tints, debadging, black seats) more to come this spring. Weather needs to be warmer.



What to look forward to:
This summer I will be installing a MS ECU with new fuel injectors, fuel pump (Walbro 255LPH High Pressure), and wideband O2 sensor (DM6 Gauge & SM AFR2 Sensor Kit).

NEXT year I hope to upgrade the turbo and install some Xida shocks.

ReallyRottenTurbo

iTrader: (1)

Tial Q BOV on order as of today Getting everything ordered for when the MS arrives to do it all in one shot.

Tallguyboost

Subscribing. You have some serious intentions with this car.

Mazduh

Woot. Subbed.

viperormiata

iTrader: (24)

Please don't black out essential pieces of lighting....

ReallyRottenTurbo

iTrader: (1)

They are not blacked out. They are fully visible. Thanks for the concern....

Hump

Lol, dont be retarded. Of course it dramatically cuts down on light output- everyone knows this.

y8s

iTrader: (8)

As a supermod I absolutely feel it would be inappropriate to make a joke about a woman's desire to be rear-ended and how the smoked tails would facilitate it.

so I will not.

ReallyRottenTurbo

iTrader: (1)

Lol don't be retarded. That's why it's my build and not yours. Of course it cuts the light output, but it is still visible and completely legal. You can't tell everything from a photo.

18psi

iTrader: (76)

she likes it from behind by a big *** bus

ReallyRottenTurbo

iTrader: (1)

That's why I married my husband. He has a big bus and knows how to use it.

ReallyRottenTurbo

iTrader: (1)

And where to use it..

y8s

iTrader: (8)

You talk like you might stick around more than two weeks. That doesn't happen with the ladies on this forum much. The 18psi types run them off pretty much right away.

What I do not know at this point in time is:

If the general membership of this forum is "gay" because they drive miatas, what's that make you?

ReallyRottenTurbo

iTrader: (1)

There's nothing wrong with a girl like likes ***** too.

18psi

iTrader: (76)

Have him try the vagina every once in a while.
He might like it and (hopefully) much cleaner.
I'm starting to like you already.
I cleanse and purify the forum. You're welcome

ReallyRottenTurbo

iTrader: (1)

The ECU came in today! We have all the parts waiting for our week off. Should be installing the week of July 21st, after our wedding. Nothing says "honeymoon" like tuning the MSM.

y8s

iTrader: (8)

the closest thing to cars I had on my honeymoon was Michelin rated restaurants.

ReallyRottenTurbo

iTrader: (1)

charge piping, pump/ injectors done, now to modifiy the roll bar so we can run harrness through it, since we now have some Bride low max seats and hook up the megaquirt PNP.. tune it and beat on it ! well forgot i need to built a crank case breather box.. as well and re-route the lines

ReallyRottenTurbo

iTrader: (1)

Small update, but a big one! engine, ECu/ wiring done! harnesses and seats fully installed... ready for the road just need to do some street tuning and than its off to the dyno!! so close if the weather would stop raining here we would be golden.

so Crank Case Vent set up built , egr Deleted and removed. all the Evap Junk Gone! Nonsense and no emmissions in MI.

we are hopeing for 250 + HP at the wheels on stock turbo with some higher boost levels.. we have the fuel system to support well over 400 HP just going to be chocked out by the stock turbo for now.... Blahh







more exterior photos will follow once weather clears!

curly

iTrader: (25)

Jesus Christ, what is that thing? Your breather line?? Zip tie it to the shock tower brace or something! My eyes!

It looks really tight too. I'd be slightly worried you'd snap that 180* fitting with a little rocking.