shuiend

iTrader: (24)

Metal is not animals. He has absolutely not reason why he can not eat the grill.

pusha

iTrader: (5)

sure he does, it's called being a bitch

shuiend

iTrader: (24)

Well we cannot fix that problem.

pusha

iTrader: (5)

rogaine on his chest maybe

shuiend

iTrader: (24)

I just spoke to Travis at Boundary Engineering about his oil pumps. I then placed an order for this. The plan is to pull the motor this weekend. Then replace oil pump during the week when it gets in. Then drop in the motor the following weekend.

flounder

You said you checked the connector, but did you test the sender itself?

shuiend

iTrader: (24)

I unhooked both the AN line that feeds my vvt solenoid and the line that feeds my turbo and cranked the car for a while. Nothing came out of either line. So something has to have killed the oil pump. Once I have things have apart I will post what caused the problem.

JasonC SBB

Stuck relief valve?
Didn't you have BE gears in there?

shuiend

iTrader: (24)

It could be a stuck relief valve. I tapped that general area a few times with a hammer to see if it would unstick and it did not. Yes I am running the original BE gears from the first group buy.

flounder

This is kinda backyard, but what about back feeding some air pressure into the feed line to see if you can unstick the spring? Worth a shot before tearing it down.

Faeflora

iTrader: (2)

i actually had all the hair on my chest laser-hair-removed.


also lars. i think that with this engine pull, you will have pulled your motor more times in a year than me.

shuiend

iTrader: (24)

Considering this is the first time this year. I think you still loose.

Faeflora

iTrader: (2)

How about within a one year period.

soviet

iTrader: (10)

Since you were running a non-VVT pump on a VVT head, I'm interested to see how much better your oil pressure becomes with the new pump.

Plz report.

pusha

iTrader: (5)

lol you boner, why would you do that?

shuiend

iTrader: (24)

The last time my engine was out was August 2010. Then May 2010 before then. So that is two in a single year spread. What are you currently at?

BE gears are ordered and will hopefully ship by Friday. My new ACL race bearings shipped from TSE today. Tomorrow I will order all the random gaskets I will need from Finishline. I will most likely pull the motor Sunday morning. Saturday will be spent unhooking everything.

Faeflora

iTrader: (2)

Because i got sick of shaving it when i wore corsets.

soviet

iTrader: (10)

wait, why are you getting bearings? I thought you were just replacing the oil pump....

curly

iTrader: (25)

That's one of the first things to get ruined when you loose oil pressure. That, cam bores, cam lobes, and piston bores.

Edit: Did you loose oil pressure, or is it just extremely low?

Braineack

iTrader: (62)

he slowly lost it. he was complaining it was low the other day, then lower, then nothing.