wonton's 95 R-Package shenanigans
#141
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
thanks mayne! hopefully everything goes smoothy tomorrow.
teh to do list:
install flywheel and clutch goodies
bolt up the transmission
install PPF
start working on the ECU plug repin
get all the wires hooked up
and play around with the reroute ****
teh to do list:
install flywheel and clutch goodies
bolt up the transmission
install PPF
start working on the ECU plug repin
get all the wires hooked up
and play around with the reroute ****
#147
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
yeah man! im bout to go into work and will get part number as soon as i get home from work!
im probly gonna run a screen for a bit will i can get around to makeing on that will sit in front of the engine!
im probly gonna run a screen for a bit will i can get around to makeing on that will sit in front of the engine!
#150
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
Thanks guys!
the PNs for the hoses are:
Front hose: (E)71446
Rear hose: 71638 (it is actually the factory front hose on the miatas 94-up)
heater return: 80407CS
i got all the parts from Advanced Auto Parts.
the PNs for the hoses are:
Front hose: (E)71446
Rear hose: 71638 (it is actually the factory front hose on the miatas 94-up)
heater return: 80407CS
i got all the parts from Advanced Auto Parts.
#152
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
my turbo is a little back from that but similar placement....
if you can do without the power lights, it makes a wicked place for a filter....
just remove the motor and use the upper bolt hole from the electric motor and put a short 10mm bolt on the arm there... push it all the way up and bolt it in.
its a tight fit, but it is pretty legit... i wouldnt run without a filter ever.
if you can do without the power lights, it makes a wicked place for a filter....
just remove the motor and use the upper bolt hole from the electric motor and put a short 10mm bolt on the arm there... push it all the way up and bolt it in.
its a tight fit, but it is pretty legit... i wouldnt run without a filter ever.
#157
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
well, i got a lil bit of work done on the car tonight.
I halfway removed the hoodlatch cause it will not be needed, I also made a new air-diversion panel thingy that doesnt have the cut out for the latch. As soon as i can get ahold of a camera Ill take pics of the old one I made and post it up for sale.
I also started working on my cold side IC pipes and started on my intake for the turbo. Needless to say I wont be able to put my headlights down and Im looking into ways of doing some lowpro fixed lights or mounting some HIDs in the turnsignal holes. Im just tossing around ideas right now while I brainstorm on the ideas I already have.
I also picked up a rear tyangle brace (and for the life of me cant remember how makes it)
pics soon to come!
I halfway removed the hoodlatch cause it will not be needed, I also made a new air-diversion panel thingy that doesnt have the cut out for the latch. As soon as i can get ahold of a camera Ill take pics of the old one I made and post it up for sale.
I also started working on my cold side IC pipes and started on my intake for the turbo. Needless to say I wont be able to put my headlights down and Im looking into ways of doing some lowpro fixed lights or mounting some HIDs in the turnsignal holes. Im just tossing around ideas right now while I brainstorm on the ideas I already have.
I also picked up a rear tyangle brace (and for the life of me cant remember how makes it)
pics soon to come!
Last edited by WonTon; 11-02-2010 at 11:48 PM.