blloyd29

Category: Import
Status: Clean Title

UPDATED and sorted out better as of 6/3/2013

I have a 1995 Mazda Miata for sale, in Mount Vernon, WA.


Asking price is $4,250



Selling my project. Bought a new Porsche because I didn't have time to put this together. Tons of good stuff. Check out my "build" here:
https://www.miataturbo.net/general-m...m-58310/page3/

The car is in complete running order as it sits right now. Just put it back together and road capable. You could easily drive this home long distance. Suspension is tight and the car runs great. 3 of the 4 tires have 70% tread or more, 1 tire is mismatched and is closer to 30% tread.

Items installed on the car have 1 mile on them as of now. It's pretty nice out so I may go cruise around some but the gist is that they are new.

Already installed (+ Prices if sold seperately):
-MSM Billstiens QA1 7k / 6k springs Allstar Sleeves $500 + stock suspension
-CTR Front Ball Joints (Both sides)

Have still in box:
-Sparco R100 seats w/ adjustable mounts $500
-Racing Beat Tubular Front Sway Bar, brand new with all hardware and WhiteLine adjustable end links $170
-A few odds and ends pieces like A-pillar gauge pod, also have center console gauge pod, chrome O-rings for the heater vents.
-Hard Dog roll bar

Complete Turbo Setup $2,000 (Also still in box):
-MegaSquirt PNP
-T3/T4 Turbo
-Custom Wittyworks Ceramic coated Manifold with T3 flange
-Tial 38mm Wastegate
-Custom 3 inch exhaust all the way back
-Magnaflow 22 inch muffler
-3 inch flexpipe after V-band from downpipe to midpipe
-27x7x2.5 CXRacing intercooler
-Complete 1 piece aluminum piping
-4 Silicone couplers
-3 bungs welded into cold side piping and a flange for the silicone intakes BOV. 1 bung for IAT sensor located to not heatsoak, 1 bung for a wastegate signal line, and one 90 degree fitting that hooks into the IAC valve.
-440 RC injectors, 0 miles since rebuild
-AEM Uego wideband sensor + Gauge and A-pillar gauge pod.
-Corksport Urethane Exhaust Hangers


I'm sure I am missing a few other things...

Things this car needs:
-Both door cards are missing, never got around to fixing or replacing them as I had more important things I wanted to do.
-Power steering leaks a little bit. This was going to be removed when I did the turbo setup so I never messed with it.
-Rear window has a 1/2 inch cut in it, what 1995 doesn't? The non-window part of the top is a solid 9/10 and in great shape.
-Radiator needs to be flushed after sitting. Another item that is easily taken care of at time of turbo install.

Overall you are getting an awesome project with all the parts already purchased and available to you at a big discount. The legwork is complete, now put it together and shred the gnar!

turbofan

iTrader: (1)

Could you post up some more recent pics? What exactly is wrong with the paint? What is the current status of the interior of the car?

supercooper

MOAR PICS!!!! and, any pics of the turbo stuffs and things??

blloyd29

The car is still sitting in the same spot as this picture. Hasn't left the garage. I will try and get some new pictures, interior is still missing door panels. Never installed the Sparco's. if you look through my couple threads, everything is in there. I will sort it out better.

blloyd29

The previous owner painted the car himself. It's a 7/10. Shines much better than the original paint would have but wasn't prepped good enough.

turbofan

iTrader: (1)

Would definitely recommend that. Take 5 pictures, at least, of the car in current condition: interior pics, tires, exterior pics, and any parts out of boxes. Then take 15 minutes to upload them and make a full, detailed list if included parts. I'm somewhat interested in the car but am not totally sure what I'd be getting at this point.

blloyd29

Forgot to include it also has a Hard Dog roll bar that comes with it.
Here are some pictures taken yesterday, pulled it out of storage and did a real quick wash:

blloyd29

Here are pictures of the turbo setup and build, courtesy of Wittyworks when they were installed on his car. This entire setup is still in the box. I have not opened it.

blloyd29

Here are pictures of the turbo setup and build, these are actual photos of my setup.

Tekel

iTrader: (2)

The amazing color changing miata?

blloyd29

This is Wittyworks setup, it is still in the box. Just because it was previously installed on a different car doesn't make it any less the actual parts. So yes, these are correct and these are the same parts I have. Not as in looks the same, they ARE the same...

Tekel

iTrader: (2)

So they are not installed one your car? Or they are installed?
The statement "these are actual photos of my setup" caused the assumption everything in the photographs was your setup and what you were selling. Thank you for clarifying. Ambiguity helps no one.

blloyd29

I thought I was being pretty clear, I'm still in the middle of cleaning this up.

^ I say it here ^

^ And again here ^

To clarify: these parts ARE NOT installed on my car. YES, I am selling the PARTS in those pictures. The car is different, the parts are the actual parts you will be getting.

wittyworks

iTrader: (6)

Blloyd, you have some pictures of two of my different setups. The manifold that is coated is the correct one that you have, the manifold that has the efr attached belongs to soviet

Top 5 are soviets, bottom are blloyds. This setup ran great when I sold it to blloyd, I just wanted to upgrade to the efr since I like building stuff.

blloyd29

Thanks for clarifying, I have updated the pictures to reflect everything correctly. I wish I could have finished this, I couldn't even find someone to pay to finish it. Working 2 jobs, having a girlfriend who always wants to do stuff and managing rentals makes a project like this hard to complete. I hope someone can pick this up and finish what I started.

$teady$upreme

so for $4250, what's included? post is confusing.

kajmapper

hey man I'm interested in your Miata project you got listed......I saw it on Craigslist last week and im trying to get ahold of you please send me your phone number
I live in WA

blloyd29

Everything is included! The car, all the parts, all of it! It's only confusing because its the best deal ever.

blloyd29

360-391-2197
I should be around most of the weekend. I have been driving it around the last few days since its been so nice. Hit me up and we can set up a time to go through everything I've got.

kajmapper

Great I'll call in the morning