T25 oil line size, -3 or -4?

Reply Subscribe

Thread Tools

Search this Thread

12-12-2007, 05:07 PM

teknikscian

Junior Member

Thread Starter

iTrader: (3)

Join Date: Apr 2007

Location: San Diego CA

Posts: 399

Total Cats: 0

T25 oil line size, -3 or -4?

searching turned up a whole slew of different answers, and i just want to clarify things.

I have an older T25, non ball bearing, turbo. does it need to be supplied with a -3 or -4 feed line?

thanks!

12-12-2007, 05:24 PM

Braineack

Boost Czar

iTrader: (62)

Join Date: May 2005

Location: Chantilly, VA

Posts: 79,493

Total Cats: 4,080

most people use a 7/16-24 -3an inverted flares. however, -3an fittings to the block are nearly impossible to find, if you do, they are $20. whereas a -4an fitting is $5-7. if -3an i'd run without a restrictor, if -4an id rock a restrictor.

12-12-2007, 05:39 PM

teknikscian

Junior Member

Thread Starter

iTrader: (3)

Join Date: Apr 2007

Location: San Diego CA

Posts: 399

Total Cats: 0

i was planning on running a sandwich plate which has 4, 1/8npt holes. and 1/8 to -3 fittings are a few bucks.

Thanks for clarifying, ill go with the -3 lines and fittings..

12-12-2007, 06:08 PM

Saml01

Elite Member

iTrader: (9)

Join Date: Jul 2007

Location: NYC

Posts: 5,710

Total Cats: 3

Tunertoys offers a block fitting for the oil pressure sender for 21 bucks. 1/8npt tap.

12-13-2007, 09:31 AM

TunerToys

Junior Member

iTrader: (2)

Join Date: Nov 2007

Posts: 57

Total Cats: 0

Quote:

Originally Posted by Saml01

Tunertoys offers a block fitting for the oil pressure sender for 21 bucks. 1/8npt tap.

Thanks for the mention Sam. Those block fittings are located here...http://tunertoys.zoovy.com/product/O...al_Outlet.html

Also, we should be close to having feed line kits for those using the OEM block port.

Craig