naarleven

iTrader: (2)

I was driving down the highway and I couldn't make any boost.

Opened the hood to find that apparently I have lost the clip which holds the wastegate arm down.

What is a temporary fix/where can I find a new clip asap?

Thanks.

Saml01

iTrader: (9)

NAPA has awesome clips that have this metal portion that doesnt let it come off.

Everytime I see a napa I forget to stop in and see wtf they are called. I have one on my turbo and its the shiznit.

Temporary fix is a thin paperclip you wind on a couple times.

naarleven

iTrader: (2)

Thanks man!

kotomile

iTrader: (24)

I think mine still has a paperclip on it...

ZX-Tex

iTrader: (15)

Safety wire if you have it
Lowe's has the clip you need in the hardware section. I forget the size.

Braineack

iTrader: (62)

pop rivet, wire, paper clip, etc etc etc

skidude

iTrader: (3)

Mine has a small piece of safety wire. I have no intentions of changing it out for a pin because the safety wire works just fine.

wayne_curr

iTrader: (8)

How did it come off? Mine has no clip at all and its never come loose.

naarleven

iTrader: (2)

My arm seems to be at a slight angle to the thing the little arm rests on(i'm full of lingo) so any movement and the arm wants to come off. And I was ******* with it at the dyno today trying to get the boost correct (I think my MBC is broken, completely closed it wouldn't make more boost, messing with the wastegate I got more boost). Paperclip fixed it however.

LOOINEY

They are called Retaining E-Clips

nickt93

iTrader: (5)

Yep. I found them at Ace for $0.16 each. They have two size - 1/8" and 3/16" I believe. The smaller of the two worked best on my turbo.

Saml01

iTrader: (9)

Close but no cigar, mine is still better.

Im gonna find it for you guys, I promise.