miatamania

iTrader: (9)

I got a drill bit and tap for a 3/8" NPT sized hole (begi's I assume) from a member here and I just need to finish ordering parts. I have a 5/8" slip on fitting on the turbo already, so I just need:

3/8 NPT male to 5/8" nipple < This work?
http://store.summitracing.com/partde...5&autoview=sku

About...2 feet of 5/8" Silicone hose...can I get high temp silicone hose anywhere? or is there a certain type recommended?

GM Boost Solenoid
http://www.diyautotune.com/catalog/b...oid-p-175.html

GM Boost Solenoid...connector:
http://www.diyautotune.com/catalog/b...ail-p-176.html


I think that is all I need now. The GTI is running worth a **** and should be reliable from here on out...so the boostage can begin.

Braineack

iTrader: (62)

should be able to pick up that same fitting from advance auto parts...

Savington

iTrader: (31)

ATP sells a high-temp silicone drain hose specifically made for oil. Don't know whether it's the same **** as anyone else sells; but Summit probably has it too.

miatamania

iTrader: (9)

I can't find any of this **** in the hick *** mountains....

NoiseRacing

For the fitting why not just get a brass one from Home Depot, works just the same.