alright selling the stang putting alot of money into the miata
#21
yea well begi im defiantly getting, megasqurit pnp probably, sparcos are expensive...but well see i have a borla catback already and high flow cat, should i do a catless exhuast or leave the high flow on? And il be getting some good suspension, only 17, but i still drink my moms my hook up and i got a fake id aha
borla catback = 2.25", you'll want at least a 2.5-2.75"
i always run cats. i'm an prefer to keep my cars legal.
good suspension is a must with more power. a limited slip diff is also critical. i really wish i had sorted both out before putting in my turbo as they are hurting me at this point.
a roll bar would also be a wise addition, at your age you will do something stupid (probably more frequent than us "old people"). nothing personal, it's just that you've only had a license for 2-3 years and your experience level is relatively low. turbos add a whole new layer of complexity to driving.
#22
If I had that kind of cash I'd just buy:
1) BEGi S2 or S3
2) Xede
3) Enthuza exhaust
4) revalved konis
5) FCM mounts
6) FCM coil over sleeves
7) 500 lb/in front and 300 lb/in rear springs
8) Sparco Sprint seats
9) Clutchnet clutch
10) lots of beer for install
and you would probably still have some cash left over...
1) BEGi S2 or S3
2) Xede
3) Enthuza exhaust
4) revalved konis
5) FCM mounts
6) FCM coil over sleeves
7) 500 lb/in front and 300 lb/in rear springs
8) Sparco Sprint seats
9) Clutchnet clutch
10) lots of beer for install
and you would probably still have some cash left over...
You also forgot the 7" diff swap with an LSD (either torsen or rx7 clutch pack)
And 15x7 or 15x8 wheels with 225/45/15 Hankook RS2's or that new toyo that is supposed to come out.
Sprints are only 300$ each. They are on my "when I have cash to blow" list.
#23
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
aha thanks i just contacted stephnie about the begi kit so im ordering that soon prob the bigger turbo, s/g downpipe, ceramic coating top line everything, ms, im thinking act clutch and light weight flywheel, and il put a new diff in when i blow my other one aha someone said to run 460's? Should i run 460s or 550s my hp goal is around 250.
#26
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
lol i got 2 grand in one of those from my paper money lmao, and its in there for 6 years i dont get it until im 21 but im covered for school already im goods, if i need more i will just ask my dad ahha
#28
I don't get it? On the first page you(miataz) said that you had 10g's to blow, but when someone mentioned getting a 1.8 and building it with forged internals you said no to both. My question is why? You'll have a huge sense of security knowing your motor is built, and you'll have one fast *** car.
P.S. sorry for throwing the thread a little of topic since you guys were discussing the injectors right before my post, I just had to ask.
P.S. sorry for throwing the thread a little of topic since you guys were discussing the injectors right before my post, I just had to ask.
#30
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
I don't get it? On the first page you(miataz) said that you had 10g's to blow, but when someone mentioned getting a 1.8 and building it with forged internals you said no to both. My question is why? You'll have a huge sense of security knowing your motor is built, and you'll have one fast *** car.
P.S. sorry for throwing the thread a little of topic since you guys were discussing the injectors right before my post, I just had to ask.
P.S. sorry for throwing the thread a little of topic since you guys were discussing the injectors right before my post, I just had to ask.
#31
aha i dont know i dont feel like throwing in a whole new engine, the turbo kit is like 4grand+ alone. I mite forge it mite not i dont want a huge turbo and i cant even drive it on the street i want like a fast street car not a track car, and i dont know that much about engines i have the book but still...and i mite just wait till she blows But that is all true, i mite not get the 1.8 but i mite forge it well see if i get some help i mite do it, i probably will though because i am pulling the motor out soon so since its out mite as well eh?
#33
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
lmfao sorry my bad just got new computer and the keyboard is different the letters are closer together and my hands are so big so i push more then one button at a time, and my spell check doesn't work because i have a different computer it usually does it automatically but now i have to actually click it. Now thats all sorted out lol.
#35
Elite Member
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
If i had 10k to put into a miata i would get a nice begi kit as savington said along with some full coilovers/sways/braces ect. If you dont have a torsen, get one. Hardtop if you dont have one, roll bar as well or even cage depending on what kind of driving you will be doing. Street vs track car.
With the extra money i would buy a Whole Life insurance policy which invests money as well as pays for your life insurance and eventually pays for itself after a set period of time and eventually one can withdraw money from that account and never have to pay life insurance again.
With the extra money i would buy a Whole Life insurance policy which invests money as well as pays for your life insurance and eventually pays for itself after a set period of time and eventually one can withdraw money from that account and never have to pay life insurance again.
#36
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
lol you guys keep talking about these funds, i already have about 5 bank accounts for me 3 for school ones a mutual fund and ones spending money, and if i run out of any il just ask my dad for more lol. Whats good suspension, like what brand should i get i know there is alot out there but what ones? Torsen can wait until i blow my stock one aha i mite be getting a hard top, i have a style bar probably going to sell get a rollbar chromed or something like that. I think im going with the BEGI-s stage 3 one with an intercooler upgrade, and the turbo upgrade i think its going to be around 4,000-4,5000 so theres half the money, ms and injectors is another grand, suspension grand, roll bar 500, then torsen prob and i got 3 grand left over not bad.
#37
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
might be a dumb question, but im pulling the motor should i put on the turbo kit while the motor is out or while its in, because i was thinking there might be some fitment issues, so what would be easier, while its in or out?
#40
I'm Miserable!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
i was thinking about going with these for flywheel/clutch combo
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
http://cgi.ebay.com/ebaymotors/FIDAN...ayphotohosting
I am going to put the 1.8 in my 1.6 engine, ive seen alot of people doing it, any thoughts?
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
http://cgi.ebay.com/ebaymotors/FIDAN...ayphotohosting
I am going to put the 1.8 in my 1.6 engine, ive seen alot of people doing it, any thoughts?