aluminium or s/s for IAT and BOV mounting
11-08-2010, 05:16 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: Glasgow, Scotland, U.K.
Posts: 115
Total Cats: -12
aluminium or s/s for IAT and BOV mounting
getting to the stage now that i want to order my megasquirt with IAT sensor kit comes with either alu or mild steel bung and to order the Tial bov Q same again comes with mild steel or alu welding flange.
whats your suggestions for what material to get alu or mild steel.
also any examples of how to mount these onto the intake pipework the IAT sensor bung is flat so cant see how thats going to be welded onto a round pipe.
dont really have a clue about this.
whats your suggestions for what material to get alu or mild steel.
also any examples of how to mount these onto the intake pipework the IAT sensor bung is flat so cant see how thats going to be welded onto a round pipe.
dont really have a clue about this.
Reply
0
0
11-08-2010, 08:25 AM
#3
Junior Member
Join Date: Jun 2007
Location: Grayslake IL
Posts: 407
Total Cats: 2
Depending on the shape of the IAT bung it is probably small enough that any small gap left after drilling the hole can be filled by the person who is doing your welding.
As for the material, just match it to what you are using for your charge pipes. If you somehow have plastic pipes, you should think about using metal ones.
As for the material, just match it to what you are using for your charge pipes. If you somehow have plastic pipes, you should think about using metal ones.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
