estephens13

Hey, I can pick up this turbo local for $110 (I am 99% sure its this one) and really dont understand turbo specs very well. I am aming for 200-225hp on my 1.8.
Thanks guys.
T3/T4 UNIVERSAL TURBO CHARGER ,50 AR CIVIC INTEGRA : eBay Motors (item 320482329733 end time Feb-07-10 11:56:27 PST)

Braineack

iTrader: (62)

if you want a power output like this:



then it's perfect.

gospeed81

iTrader: (51)

holy sportbike power curve batman!

estephens13

Well that sucks. Thanks for the info, I'll keep looking.

Mach929

iTrader: (3)

was this your car? how much boost?

y8s

iTrader: (8)

haha lolz 75 hp at 4 grand.

Braineack

iTrader: (62)

its a 1.6L with a 3076 at like 12psi. no boost at all until 4.2K.

cardriverx

iTrader: (12)

you know, I could see that as being real fun to drive, for awhile at least.

rharris19

iTrader: (41)

I want to build something stupid like that. Back down to a 1.6 with a holset or gt65. Would really be a hoot to jack around with.

Full_Tilt_Boogie

iTrader: (1)

although, If Im not mistaken a gt3076r is bigger than a normal T3/T4

gt != T

Braineack

iTrader: (62)

I bet something making 225rwtq at 3K is more "fun"


technically my turbine is smaller than a 3071's.

My turbine: 45mm exducer and 63.5mm inducer.
3071 turbine: 55mm exducer and 60mm inducer.

estephens13

Can you guys give me a range of numbers and the important specs so Im not running back asking about turbo after turbo. Thanks

Full_Tilt_Boogie

iTrader: (1)

the old T system is really annoying, the garrett system makes sense because its actually telling you the inducer and exducer diameter. But when its just a "T3/T04" it could be such a huge range of sizes...

Braineack

iTrader: (62)

it's telling you GT for Garrett Turbo, then the turbine "size", and then the compressor inducer size in mm. a 2560 and 2860 both have a 60mm compressor wheel, but the 2860 is like .07" larger inducer. the 2560 obviously has a smaller turbine than the 2860. but yes, Makes much more sense the quickly judge the size.

my T3 Super 60 would be labeled like a GT2960.

rweatherford

I unfortunately am better versed in the T system and am lost on the GT system, but am slowly picking it up.

So what's the GT #'s for a T40E 50 Trim?

Braineack

iTrader: (62)

It's kinda out the window at that point, but the 3076 would be the closet. Since the t04e 50 trim wheel is 76mm/54mm and the 3076 wheel is 76.2mm/57mm

estephens13

Anyone know anything about a TB03 off a 81 280zx? I can't seem to find much info about it.

Braineack

iTrader: (62)

just a T3, not sure the sizing.


edit: looks like a 60 trim T3.

http://www.redz31.net/pages/turboupgrade.html

estephens13

Think its worth a shot for $125 with downpipe?

Braineack

iTrader: (62)

if it's in incredibly good shape sure. with your power goal you could use the same ebay T3 50 trim I'm using. IIRC i got it for $175.