tuckermon

iTrader: (5)

I have a turbo available to me, just want to know what it is before I do anything with it. It's out of a sr20det (s13??)

Specs:
Compressor: T-25, 60 trim 56mm 0.80 A/R BCI-1 compressor
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing
Type of Bearing: Journal

EO2K

iTrader: (37)

Is there a data tag on the center housing?

Same specs and looks exactly like the SR20DET S13 journal bearing T25 in my garage. I'll check tonight but I'm sure someone can confirm before I can get pics

Savington

iTrader: (31)

Sounds like a SR20 T25, which is basically a non-DBB 2554/2560R-ish turbo. Probably the best cheap DIY turbo, since any 2560/2860RS/2871R bolts into the same manifold/DP. Expect ~200whp at 13-14psi and good low-end torque and response.

Saml01

iTrader: (9)

T25 from a black top. Same turbo i'm running. You'll love it.

tuckermon

iTrader: (5)

I'm looking to upgrade the stock MSM turbo. Just thinking this T25g will be a bit small or very similar to the stock turbo. Any input? The Tag on the unit has been removed.

18psi

iTrader: (76)

Great turbo like Sam and Andrew said, but it is a very mild upgrade. Still better, but not much. If you want more than low 200's, you'll need something bigger.

tuckermon

iTrader: (5)

That’s what I figured. I've been looking for a 2560. Any other recommendations?

18psi

iTrader: (76)

2560 is a great 250-290 turbo. the tater (2860rs) is nice for 290-330. if you're looking for broad power curve those 2 would be great for the power levels you're looking for

tuckermon

iTrader: (5)

Now just to find a 2560 thats worth buying....

thenuge26

iTrader: (2)

If you want to go cheap, look for a T28, as they are very close to a 2560. They have them all the time on Zilvia.

Braineack

iTrader: (62)

Stock MSM Turbo:




T25 you can buy:

18psi

iTrader: (76)

to be fair the stock msm turbo spools fairly quick, its the POS stock ecu causing the graph to look like a rotrex lol

tuckermon

iTrader: (5)

I'm looking at an ECU too. If I can find a Hydra or get some info on building a MS3.

18psi

iTrader: (76)

hydra blows dongs.

ms3 ftw

even an ms2e will work for you since msm has no vvt

tuckermon

iTrader: (5)

I'd like to go MS3 but I need some info from people running MS units before I jump that way. I don't mind building it myself, I just need to ask a few questions before jumping out and buying stuff.

TheBigChill

That's a T25g from a 90-94.5 S13 Red Top SR20DET.

Forgive the off-topic post, but I feel the following is useful information for you guys:


88-90.5-CA18det (S13 and 180sx T25 turbo 182hp 180tq 7psi)

90.5-94.5-SR20det Redtop (S13 silvia and 180sx T25 turbo 210hp 207tq 7psi)

94.5-96-SR20det Blacktop (SilEighty NISMO cams T28 turbo 242hp 234tq 10psi only 400 ever made)

95-99-SR20det Blacktop (180sx T25 turbo 210hp 207 tq 7psi)

95-98-SR20det Notchtop (S14 blacktop T28 turbo VVT intake cam 232hp 224tq 7psi)

99-02-SR20det Notchtop (S15 blacktop T28 turbo VVT intake & exhaust 252hp 243tq 10psi)