Swapping a 1.6 turbo setup to a 1.8
#1
Swapping a 1.6 turbo setup to a 1.8
Hi I am currently looking into getting a Miata t. I found one but its a 1.6 turboed. My questions is lets say down the line the 1.6 ***** out on me, can I swap all the parts over to the 1.8? Its a begi turbo setup tuned on ms pushing 220 rx8 injectors. Thanks for the help! I have tried to search for this but cant find anything about swapping the turbo kits over
#2
The manifold will not be good and depending on your exhaust that may need some modding. Also if you have an intercooler it may need some reworking.
The 1.8 is slightly longer and it makes the downpipe sit back a bit further. Depending on your exhaust you may need mod it to fit.
I had top mount ic piping and had to manipulate it a bit differently due to the lost space between my engine and the sway bar. The manifold is the only thing not possible to modify in a pinch though so you WILL need a new one.
The 1.8 is slightly longer and it makes the downpipe sit back a bit further. Depending on your exhaust you may need mod it to fit.
I had top mount ic piping and had to manipulate it a bit differently due to the lost space between my engine and the sway bar. The manifold is the only thing not possible to modify in a pinch though so you WILL need a new one.
Last edited by krissetsfire; 03-23-2013 at 01:16 PM.
#3
Most. The manifold will not be good and depending on your exhaust that my need some modding. Also if you have an intercooler it may need some reworking.
The 1.8 is slightly longer and it makes the downpipe sit back a bit further. Depending on your exhaust you may need mod it to fit.
The 1.8 is slightly longer and it makes the downpipe sit back a bit further. Depending on your exhaust you may need mod it to fit.
#5
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,179
Total Cats: 1,129
An engine is an engine. If you're putting a 1.8 in place of a 1.6, you don't have to touch the MS as long as you use all the 1.6 electronics like the coils and CAS.
Injectors work the same '90-'05, but obviously you're going to need more head room, since you're now fueling a larger engine.
I'm guessing you meant 440rx-8 injectors? I've never heard of 220.
Injectors work the same '90-'05, but obviously you're going to need more head room, since you're now fueling a larger engine.
I'm guessing you meant 440rx-8 injectors? I've never heard of 220.
#7
An engine is an engine. If you're putting a 1.8 in place of a 1.6, you don't have to touch the MS as long as you use all the 1.6 electronics like the coils and CAS.
Injectors work the same '90-'05, but obviously you're going to need more head room, since you're now fueling a larger engine.
I'm guessing you meant 440rx-8 injectors? I've never heard of 220.
Injectors work the same '90-'05, but obviously you're going to need more head room, since you're now fueling a larger engine.
I'm guessing you meant 440rx-8 injectors? I've never heard of 220.
Yea sorry I meant pushing 220hp but yea it's got rx8 injectors so the seller says.
I am not sure my guess would be the one that comes with the begi s setup
Thread
Thread Starter
Forum
Replies
Last Post