where to rob aluminum tubing
12-21-2006, 10:32 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
where to rob aluminum tubing
Im trying to think of any items i could find laying around somewhere that is made from think aluminum 2 inch tubing that i can use to weld to my intercooler.. any ideas?
Reply
0
0
12-22-2006, 07:53 AM
#4
Junior Member
Join Date: Aug 2005
Location: Cayman Islands
Posts: 440
Total Cats: 17
check any mechanical/plumbing engineering company, people who do electrical and piping for gas stations, generators
any boat shop...like work shop not retail
this one should be obvious but a welding place is almost garunteed to have some scrap you can use
on that note you should find that most of the guys that are in those fields would be happy to give you a pice of scrap if you asked, hell buy em a beer and **** and you might eventually have access to cheap welding or materials....
(all the welding shops on the island are run by miserable people so i still raid their scrap bin on sundays:gay:
any boat shop...like work shop not retail
this one should be obvious but a welding place is almost garunteed to have some scrap you can use
on that note you should find that most of the guys that are in those fields would be happy to give you a pice of scrap if you asked, hell buy em a beer and **** and you might eventually have access to cheap welding or materials....
(all the welding shops on the island are run by miserable people so i still raid their scrap bin on sundays:gay:
Last edited by Sirnixalot; 12-22-2006 at 08:36 AM.
Reply
0
0
12-22-2006, 10:53 PM
#20
Junior Member
Join Date: Jul 2006
Posts: 88
Total Cats: 0
Robbing from Rice
Go into some ricer neighborhood with a screwdriver, find a honda with some exposed IC pipes and take what you need.
Here's what I am talking about
Here's what I am talking about
Last edited by retro; 12-23-2006 at 10:38 AM. Reason: Fixed pic link.
Reply
0
0
