Question about fittings.
02-07-2008, 08:40 PM
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jul 2007
Location: NYC
Posts: 5,710
Total Cats: 3
Question about flare fitting.
A friend hooked me up with fittings I need for oil drain.
Brought me a 1/2npt -> 5/8 barb. He also brought me the fitting in question. It has a 5/8 barb, the other end is NPT, but slightly smaller then 1/2. The thread step is also smaller. I put the ends together and the internal diameters are the same on both fittings. Could it be a 5/8npt?
I cant find a 5/8 npt online.
I want to know what it could be and what tap and drill I would need.
I want to use the one in question because that will leave more threads in the pan wall for a better fit. Plus its flared end sits very well inside my 5/8 hose.
Brought me a 1/2npt -> 5/8 barb. He also brought me the fitting in question. It has a 5/8 barb, the other end is NPT, but slightly smaller then 1/2. The thread step is also smaller. I put the ends together and the internal diameters are the same on both fittings. Could it be a 5/8npt?
I cant find a 5/8 npt online.
I want to know what it could be and what tap and drill I would need.
I want to use the one in question because that will leave more threads in the pan wall for a better fit. Plus its flared end sits very well inside my 5/8 hose.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
