Affordable tial Vband housing?
08-13-2009, 10:15 PM
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Renton Washington
Posts: 1,731
Total Cats: 4
Affordable tial Vband housing?
I want to do a V-band churby setup i just nabbed a GT2860rs .84 and i looked at tials website and i couldnt find any pricing which leads me to believe they only wholesale. Maybe one of you can chime in?
Reply
0
0
08-13-2009, 10:56 PM
#5
Best price I could find:
TiAL SS Turbine Housings : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intake
However, you may want to call beforehand to get a ETA on it since it may be backordered for weeks. A place like ATP (I believe this is where tim gets his) or Full Race is more likely to stock them. BTW, you still need the flange and v-band. Stuff gets expensive quickly.
TiAL SS Turbine Housings : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intake
However, you may want to call beforehand to get a ETA on it since it may be backordered for weeks. A place like ATP (I believe this is where tim gets his) or Full Race is more likely to stock them. BTW, you still need the flange and v-band. Stuff gets expensive quickly.
Reply
0
0
08-13-2009, 11:21 PM
#6
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,892
Total Cats: 399
My source for TiAL stuff is either ATP or, as I found out today, BEGI! My dad's shop got approved to become a TiAL dealer today too, I have to come up with the $3500 buy in first however. Too bad Sav already has his stuff, that would have helped a lot.
EDIT: Retail on the .86 turbine from ATP is $365, so even thru ATP I can sell it less than that. But like has been mentioned, you have 2 x $50 flanges and 2 x $35 clamps, plus an external wastegate to buy too.
http://www.atpturbo.com/Merchant2/me...egory_Code=TTH
EDIT: Retail on the .86 turbine from ATP is $365, so even thru ATP I can sell it less than that. But like has been mentioned, you have 2 x $50 flanges and 2 x $35 clamps, plus an external wastegate to buy too.
http://www.atpturbo.com/Merchant2/me...egory_Code=TTH
Reply
0
0
08-14-2009, 12:22 AM
#8
Elite Member
Thread Starter
iTrader: (7)
Join Date: Jan 2007
Location: Renton Washington
Posts: 1,731
Total Cats: 4
Prob would of been cheaper just to buy the turbo new with the tial exhaust housing... 800 for a new turbo (200 miles) and fittings,
1200 for a brand spankin new churby with v band housing.
I think if i got the tial housing for anything less than 400 id be ahead. Tim, this project is a month or so away. Maybe we can offer a group buy to get an order from tial direct through your dealer. Id be in for : .86 housing with other mate and clamp, WG vband and clamp, 3" v band for the downpipe with clamp, probably more v bands, So like 700-800$ order. and could you also win me the lottery? Thanks
1200 for a brand spankin new churby with v band housing.
I think if i got the tial housing for anything less than 400 id be ahead. Tim, this project is a month or so away. Maybe we can offer a group buy to get an order from tial direct through your dealer. Id be in for : .86 housing with other mate and clamp, WG vband and clamp, 3" v band for the downpipe with clamp, probably more v bands, So like 700-800$ order. and could you also win me the lottery? Thanks
Reply
0
0
08-14-2009, 12:31 AM
#10
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
My source for TiAL stuff is either ATP or, as I found out today, BEGI! My dad's shop got approved to become a TiAL dealer today too, I have to come up with the $3500 buy in first however. Too bad Sav already has his stuff, that would have helped a lot.
EDIT: Retail on the .86 turbine from ATP is $365, so even thru ATP I can sell it less than that. But like has been mentioned, you have 2 x $50 flanges and 2 x $35 clamps, plus an external wastegate to buy too.
Tial Turbine Housings: atpturbo.com
EDIT: Retail on the .86 turbine from ATP is $365, so even thru ATP I can sell it less than that. But like has been mentioned, you have 2 x $50 flanges and 2 x $35 clamps, plus an external wastegate to buy too.
Tial Turbine Housings: atpturbo.com
Reply
0
0
08-14-2009, 08:42 AM
#16
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I think its pretty cool that this entire forum is switching over to v-bands. We'll show the Evo faegs what's up.
I'm supposed to speak with UPS again today about cutting a check for a new turbo.
I'm supposed to speak with UPS again today about cutting a check for a new turbo.
Reply
0
0
08-14-2009, 09:16 AM
#17
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,892
Total Cats: 399
Damn Hustler...I don't know what to say.
With regards to a TiAL group buy, I have to review the 4 page minimium advertized price document. I don't think you can advertize group buys on the internet or wherever.
What I will try to do however is charge "full price" on the TiAL parts to whomever buys a manifold/downpipe from me, and sell the mani/downpipe for a lot less...same basic thing. Ultimate cost on the entire setup would be less than if I just bought the stuff from ATP like I've been doing.
On my list of definites:
GT2871 52 trim .86a/r, MV-s, flanges & clamps (the snowboarder)
MV-s, flanges & clamps (hustler)
Maybe:
.86 a/r, MV-s, flanges & clamps (sbkcocker)
BOV (hustler)
I may as well get a .64 a/r or two too, and maybe a turbo for me.
With regards to a TiAL group buy, I have to review the 4 page minimium advertized price document. I don't think you can advertize group buys on the internet or wherever.
What I will try to do however is charge "full price" on the TiAL parts to whomever buys a manifold/downpipe from me, and sell the mani/downpipe for a lot less...same basic thing. Ultimate cost on the entire setup would be less than if I just bought the stuff from ATP like I've been doing.
On my list of definites:
GT2871 52 trim .86a/r, MV-s, flanges & clamps (the snowboarder)
MV-s, flanges & clamps (hustler)
Maybe:
.86 a/r, MV-s, flanges & clamps (sbkcocker)
BOV (hustler)
I may as well get a .64 a/r or two too, and maybe a turbo for me.
Reply
0
0
08-14-2009, 09:58 AM
#19
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
you guys and your .86!!! where's my back to back dyno runs to prove this? what made y'all decide to never look at a .64 again?
incidentally, UPS will fix your **** the second you call up and ask for a supervisor and tell them they owe you the cost of a turbo. if they can't show a signature or note from you, they're fooooooked
incidentally, UPS will fix your **** the second you call up and ask for a supervisor and tell them they owe you the cost of a turbo. if they can't show a signature or note from you, they're fooooooked
Reply
0
0
