airbrush1

ok.... so I was looking at the car today.... and thinking that there has to be a better way to attach the fliter to the turbo than just bolting it on....

but theres a bottle in the way.... a big, black, ugly bottle there.... and it needs to be moved so I can make myself a decent intake....

Has anyone else encountered this issue when using a big turbo and a top mount manifold???? Any aesthetically pleasing options out there????? I've seen some "power steering resivoir tanks" on ebay a couple times.... but wonder how it could be done?

Braineack

iTrader: (62)

It's just two lines going in and out of it. And only bolted down with two small screws.

Murr

Remove power steering and find a manual rack and pinion

4sfed5

i made a new reservior and feed line to the pump for my install..the biggest problem was that steel l ine off the pump that does the 180* turn. i made a new flange to bolt to the pump so the new pipe drops straight down from the pump... theres a few pics here....
http://miata.cardomain.com/ride/264041/6