x_25

Wait, turbo? I thought this was a supercharger build now? :P

That said, I got the M45 on just before the winter season and it felt (and sounded) great. Made about 4.5-5psi on a larger than stock pulley (75.5mm brp one, who knows what from but it fit) and pulls great. Nice uptick in power and having a car that just slides in and out of boost like you just cranked up the atmosphere a few PSI is really nice.

Also, what supplies for an AC delete? I have decided to take mine out for now and as far as I know, it is remove compressor, lines, condencer and then I am just leaving the evap for now. (Also, put a bolt in for the oil pump, apparently one of the compressor bracket bolts holds.part of the oil pump?)

shuiend

iTrader: (24)

Yep the front bolt on the compressor bracket helps hold on the oil pump. If you remove the bracket and don't replace the bolt with the correct sized one there will be an oil leak.

x_25

Perfect. Added that to my doccument of important information and links.

shuiend

iTrader: (24)

M8 x 1.25 thread 50MM bolt to replace the one that goes with the bracket.

Goingnowherefast

iTrader: (1)

Annddddd I bought a 2003 VVT motor with 39K miles, a newish 5spd trans, Track dog racing full Rotrex C30-84 kit, and the Skunk2 intake manifold.

Sorry not sorry.