DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Is it time for a CHRA exchange?

Thread Tools
 
Search this Thread
 
Old 11-22-2011, 04:13 PM
  #1  
Elite Member
Thread Starter
iTrader: (4)
 
MartinezA92's Avatar
 
Join Date: Aug 2009
Location: Redwood City, CA
Posts: 1,784
Total Cats: 42
Default Is it time for a CHRA exchange?

GT2560R with less than 3k miles on it. Sometimes, at idle mostly and usually only when warm, you can hear it start to...cry almost. A very faint whine, but last time I checked the blades weren't touching the housing. Also it has some play which was definitely not there when I installed it. More play than I would like to see.

.040" restrictor, so I would assume its getting sufficient oiling. How much oiling does a BB turbo really need?

Has anyone else had a Garrett crap out so soon? This seems a little ridiculous to me. I plan on coughing up the 500 for the CHRA exchange but I'm definitely not happy about this.

inb4 "get efr peasant."
MartinezA92 is offline  
Old 11-22-2011, 04:16 PM
  #2  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

You're certain it's the turbo? This isn't common. My Garrett is very, very hurt (damaged turbine + old CHRA from when I still had CHRA/turbine bolt issues), has a large amount of shaft play, and it still spins free and makes boost without any odd noises.
Savington is offline  
Old 11-22-2011, 04:23 PM
  #3  
Junior Member
iTrader: (15)
 
kaboshe's Avatar
 
Join Date: Apr 2010
Location: quebec,canada
Posts: 403
Total Cats: 1
Default

i'm running a used 2560 since april above 15psi, and i got nothing close to the sound you're speaking of

video maybe?
kaboshe is offline  
Old 11-22-2011, 04:23 PM
  #4  
Elite Member
Thread Starter
iTrader: (4)
 
MartinezA92's Avatar
 
Join Date: Aug 2009
Location: Redwood City, CA
Posts: 1,784
Total Cats: 42
Default

For a while I didn't think it was. The whine changes in pitch according to rpm too. Its coming from the turbo area, and there's nothing else that spins there but I'm going to give it another listen with my electronic det cans next time I hear it and make sure its the turbo. It seems to pop up after I've been driving around for 20+ minutes, or coming off the freeway.

It still spins free and no difference in spool. Just the noise is worrying me.

EDIT: Actually I'm wrong. It's silent at idle but if I raise the rpm by the slightest amount, it starts crying.
MartinezA92 is offline  
Old 11-22-2011, 04:24 PM
  #5  
Elite Member
Thread Starter
iTrader: (4)
 
MartinezA92's Avatar
 
Join Date: Aug 2009
Location: Redwood City, CA
Posts: 1,784
Total Cats: 42
Default

Originally Posted by kaboshe
i'm running a used 2560 since april above 15psi, and i got nothing close to the sound you're speaking of

video maybe?
Its so inconsistent that I bet if I heard it, popped the hood, pulled out my phone to record it and tried to replicate it, it would stop. It's also so faint I doubt my phone would pick up the noise.
MartinezA92 is offline  
Old 12-01-2011, 02:25 AM
  #6  
Elite Member
Thread Starter
iTrader: (4)
 
MartinezA92's Avatar
 
Join Date: Aug 2009
Location: Redwood City, CA
Posts: 1,784
Total Cats: 42
Default

I just thought I'd add.


I checked the turbo for shaft play the other day. 4 days ago. Hasn't made the noise since.

does not compute.
MartinezA92 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rick02R
WTB
3
01-03-2016 07:18 PM
tazswing
Race Prep
20
10-03-2015 11:04 AM
The Gleas
MEGAsquirt
3
10-01-2015 09:30 AM



Quick Reply: Is it time for a CHRA exchange?



All times are GMT -4. The time now is 11:53 PM.