Fifty_81

I need to order a new oil feed line, but being in Canada this will take 1-2 weeks to get to me (or more given our impending postal strike). In the meantime, I have a short oil feed line I can use, but will have to extend it about a foot. Can I use a 3/8" rubber hose to the oil feed line? Any issues going from 1/8 fitting at sandwich plate to 3/8 hose back down to 1/8 fitting on oil feed line? Would really like to finalize this setup and make sure everything is working.

sonofthehill

iTrader: (1)

I would not do that with hot high pressure oil, just wait.

18psi

iTrader: (76)

that sounds so stupid that I'm tempted to tell you to do it just to see what happens
make sure you take videos/pictures for evidence

deezums

iTrader: (3)

Nothing like watching it all burn to the ground on the 4th!

Happy Canada day?

bahurd

iTrader: (8)

Just go to a local hydraulic repair shop.

Fifty_81

Awesome answers, thanks guys.

@bahurd, are you suggesting extending the line with a hydraulic line or replacing it all together.

farpolemiddle

They can make you a new line.