boiracerxx

Hey guys, I'm trying to run a stainless steel oil return line with AN fittings. I'm having a hard time trying to source the correct oil return adapter plate. Any ideas where i can find one? Thanks.

kotomile

iTrader: (24)

atpturbo.com

Any of the GT-series fittings should work. That's what I'm using anyway.

boiracerxx

Thanks.

boiracerxx

One more thing, what size AN am I suppose to buy and what size line? I'm using the Begi -8 x 3/8 NPT to tap into my oil pan. I'm just confused because most of fittings I see are -10 or -6.

curly

iTrader: (25)

you're tapping the pan to 3/8 NPT? Just get another adapter from summitracing.com for -10 or -6. Or go there and get a -8 for a couple bucks and then spend ~$15 each for some -8 fittings (non-crimp, make sure to get the ones that swivel.) Do yourself a favor and avoid the stainless steel line though, its a pain to deal with and doesn't help you at all for this application. Insulate it somehow afterwords, but the rubber stuff is much easier to deal with

boiracerxx

Thanks.