Injector Size
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Brisbane, Australia
Posts: 109
Total Cats: 0
Injector Size
I am piecing together bits for my setup and want some opinions on injector size. I have a na6 with MSPNP, will be using a fairly small t25 from a R34 GTR, and am hoping to make in the low 200rwhp bracket with around 12psi.
I already have a set of rx7 440s(199500-2010) which I have had cleaned and tested but not yet installed. I origionally went the 440s as I wanted to retain better resolution down low.
I have done the calcs and it looks like they should be around the right size for my expectations but I wanted to hear from some of you about it, as I don't know how accurately the figures apply in real life.
I do also have cams and am seeing over 90% dc out of the stock 230s N/A so this has me thinking maybe I should go for some 550s from the beginning to leave some headroom? Opinions?
Cheers, Tim
I already have a set of rx7 440s(199500-2010) which I have had cleaned and tested but not yet installed. I origionally went the 440s as I wanted to retain better resolution down low.
I have done the calcs and it looks like they should be around the right size for my expectations but I wanted to hear from some of you about it, as I don't know how accurately the figures apply in real life.
I do also have cams and am seeing over 90% dc out of the stock 230s N/A so this has me thinking maybe I should go for some 550s from the beginning to leave some headroom? Opinions?
Cheers, Tim
#4
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
I'm using a set of Bosch 465s, virtually the same as your 440s. I don't have a HP number, but on my intercooled, Greddy-based system (TD04H-15G turbo) running typically 12-13 PSI, the highest I've ever seen them go is ~80%. IOW, they seem to be ideally suited for this particular application.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM