DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Tuning Help - Poping @ WOT and 12 psi

Thread Tools
 
Search this Thread
 
Old 06-14-2008, 01:27 PM
  #1  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default Tuning Help - Poping @ WOT and 12 psi

Under WOT and boost controller set to 12 psi. I get poping noises coming from the tail pipe, and slight hesitation during those pops.

@ 8psi - I get no pops @ wot
@ 10 psi - I get one / two once in a while @ wot
@ 12 psi - Lots of pops at wot

I am still a beginner in tuning, so I'm not sure what that is. Any ideas what that is or next steps to find out what it is?

I logged a run, and nothing seems out of the ordinary.
Attached Thumbnails Tuning Help - Poping @ WOT and 12 psi-latest.jpg  
rippledabs is offline  
Old 06-14-2008, 01:46 PM
  #2  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

Here is the log with the knock sensor and timing
Attached Thumbnails Tuning Help - Poping @ WOT and 12 psi-latest.jpg  
rippledabs is offline  
Old 06-14-2008, 01:50 PM
  #3  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

Sounds like you're too rich or you're dealing with spark blow out. Your knock sensor would show it missing you would think but maybe not. What AFR are you seeing during the popping and what is your spark plug gap at?
cjernigan is offline  
Old 06-14-2008, 02:07 PM
  #4  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

at 12 psi, the datalog shows 11.5 A/F

I havn't check the spark plugs yet.

I should replace the plugs,

Any ideas which plugs should I get, and where can I get them?

Also what gap do you recommend?
rippledabs is offline  
Old 06-14-2008, 02:16 PM
  #5  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

Advanced auto has NGK i believe. BKR7Es or BKR6Es depending on use. 6's should be cold enough for you if its a street car. They come pregapped at .035 I believe. I suggest leaving them at that gap. If you continue to have spark blow out issues close the gap up more to more like .025".
cjernigan is offline  
Old 06-14-2008, 02:30 PM
  #6  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

is the V-Power Plugs ok too? Advance doesn't have the regular ones in stock, and they cost the same.
rippledabs is offline  
Old 06-14-2008, 02:36 PM
  #7  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

Call around i'm sure you can find them elsewhere if necessary. I only recommend the BKR7&6Es because I know the heat range. If you can get a plug of similar heat range just set the gap to .035 and make sure they're all the same and try it that way.
cjernigan is offline  
Old 06-14-2008, 02:40 PM
  #8  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

What's your spark plug gap?

("i don't know" is not a good reply, here)
Savington is offline  
Old 06-14-2008, 02:47 PM
  #9  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

Originally Posted by Savington
What's your spark plug gap?

("i don't know" is not a good reply, here)
i don't know

i assumed the last owner gapped them good, but i shouldn't assume anymore. This guy did so many things wrong.
rippledabs is offline  
Old 06-14-2008, 02:51 PM
  #10  
Elite Member
iTrader: (15)
 
thesnowboarder's Avatar
 
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
Default

Originally Posted by rippledabs
i don't know

i assumed the last owner gapped them good, but i shouldn't assume anymore. This guy did so many things wrong.
Then check.. your plugs may be just fine, or they could not be either way pulling plug wires off and yanking a few plugs out can take up to 10 min if working slow.
thesnowboarder is offline  
Old 06-14-2008, 02:53 PM
  #11  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

Originally Posted by thesnowboarder
Then check.. your plugs may be just fine, or they could not be either way pulling plug wires off and yanking a few plugs out can take up to 10 min if working slow.
i lost my gapper, was going to pick one up while i pay the $8 to replace the plugs.
rippledabs is offline  
Old 06-14-2008, 04:07 PM
  #12  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

Never trust the previous owner of a car to have done anything right.
cjernigan is offline  
Old 06-15-2008, 08:07 PM
  #13  
Junior Member
Thread Starter
iTrader: (3)
 
rippledabs's Avatar
 
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Default

got new plugs gapped to ~.030

works great. no more popping at WOT and Full Boost.

Thanks for the help!

But every once in a while I get a loud pop when I lift throttle.

Is the reason because the ecu can't react in time to my liftoff and goes into super rich condition?

Anyway to tune it out?
Attached Thumbnails Tuning Help - Poping @ WOT and 12 psi-untitled.jpg  
rippledabs is offline  
Old 06-15-2008, 08:33 PM
  #14  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Default

It's popping when it goes from super rich to dead lean I bet. Bet it sounds like a race car with open exhaust. I don't know the link but with MS you can tune that out using overrun activation times and the lowest KPA row in your VE table.
cjernigan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
tazswing
Race Prep
20
10-03-2015 11:04 AM
The Gleas
MEGAsquirt
3
10-01-2015 09:30 AM



Quick Reply: Tuning Help - Poping @ WOT and 12 psi



All times are GMT -4. The time now is 02:04 AM.