giff

iTrader: (1)

I want to mount a GM IAT sensor in the silicone hose before the TB, is there a nice mount available to do so?
Devil's Own do a very nice piece to mount their water injectors in silcone hose, HERE, is there anything similar on the market that would fit the IAT?
Cheers.

kotomile

iTrader: (24)

I'd reconsider doing it just before the TB, I and several other members did that and while it is the best location to probe IAT, in our cars the radiator heat soaks the sensor and throws off its readings.

Stein

iTrader: (46)

Agreed. I would consider drilling and tapping a hole in the outlet of the intercooler. If you have a metal line anywhere between the IC and the TB, you could tap a hole there, as well.

In my case, the cold side line is routed through the fender so I put it there to prevent heat soak.