where to buy oil supply?
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: Royal Palm Beach, FL
Posts: 725
Total Cats: 5
where to buy oil supply?
i need to know what im missing for my turbo.
inlet - m10*1.5
outlet - 2 m8
so far i have this is my shopping cart, not sure what i need for the feed side coming from the motor, drain side off the turbo and drain into the pan.
http://www.atpturbo.com/mm5/merchant..._Code=ATP-OIL1
http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-005
http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-024
inlet - m10*1.5
outlet - 2 m8
so far i have this is my shopping cart, not sure what i need for the feed side coming from the motor, drain side off the turbo and drain into the pan.
http://www.atpturbo.com/mm5/merchant..._Code=ATP-OIL1
http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-005
http://www.atpturbo.com/mm5/merchant...de=ATP-OIL-024
Last edited by Clos561; 01-13-2011 at 03:13 PM.
#8
Here are a few options for you:
Hose @ $7.80 per foot
http://www.bellengineering.net/produ...roducts_id=584
Fitting:
3/8 NPT x 5/8 Hose barb - Qty 2 needed. One for oil pan, one for turbo
http://www.bellengineering.net/produ...roducts_id=593
Oil Inlet Fitting would be cheaper to use a straight fitting, then put the 90* on the oil line.
http://www.bellengineering.net/produ...roducts_id=474
http://www.bellengineering.net/produ...roducts_id=568
We do have an oil supply line kit for the 96-05 Miatas. It includes the engine block fitting and turbo fitting. If I need to substitute the oil inlet fitting on the turbo, I can. Just let me know.
http://www.bellengineering.net/produ...roducts_id=449
We also have the Distribution block kit that is oil and coolant lines and all fittings needed:
http://www.bellengineering.net/produ...products_id=75
Just the BSP fitting into the block:
http://www.bellengineering.net/produ...products_id=86
It is plated steel, not brass. Brass and aluminum will break.
Oil Drain line kits:
http://www.bellengineering.net/produ...products_id=82
I can put one together for a rubber line too, just let me know if you are interested. If needed, I can also get the ATP fittings at the same price.
Stephanie
Hose @ $7.80 per foot
http://www.bellengineering.net/produ...roducts_id=584
Fitting:
3/8 NPT x 5/8 Hose barb - Qty 2 needed. One for oil pan, one for turbo
http://www.bellengineering.net/produ...roducts_id=593
Oil Inlet Fitting would be cheaper to use a straight fitting, then put the 90* on the oil line.
http://www.bellengineering.net/produ...roducts_id=474
http://www.bellengineering.net/produ...roducts_id=568
We do have an oil supply line kit for the 96-05 Miatas. It includes the engine block fitting and turbo fitting. If I need to substitute the oil inlet fitting on the turbo, I can. Just let me know.
http://www.bellengineering.net/produ...roducts_id=449
We also have the Distribution block kit that is oil and coolant lines and all fittings needed:
http://www.bellengineering.net/produ...products_id=75
Just the BSP fitting into the block:
http://www.bellengineering.net/produ...products_id=86
It is plated steel, not brass. Brass and aluminum will break.
Oil Drain line kits:
http://www.bellengineering.net/produ...products_id=82
I can put one together for a rubber line too, just let me know if you are interested. If needed, I can also get the ATP fittings at the same price.
Stephanie
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM