Question about how eaisly a turbo should spin
#1
Elite Member
Thread Starter
iTrader: (12)
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 12
Question about how eaisly a turbo should spin
My shop teacher has a turbo (forget what kind.. ill post it tommorow) and if you spin it as fast as I can, it freewheels for about a sec than stops. Also, there is about a mm of shaft play. Think it needs a rebuild?
#5
Post some pics of it and we'll tell you what it is.
Also, was the turbo lubed w/oil? If there's no oil in it, the freeplay characteristics will be a little different. Splash some oil in there and spin it again... should freewheel a little longer maybe.
However, spinning a turbo doesn't necessarily tell you if it's good or not. What kind of play does the shaft have. Can you wiggle it side-to-side (even a little bit), in/out maybe? Post pics... with the housings on and off so we can see the whole of both wheels.
Also, was the turbo lubed w/oil? If there's no oil in it, the freeplay characteristics will be a little different. Splash some oil in there and spin it again... should freewheel a little longer maybe.
However, spinning a turbo doesn't necessarily tell you if it's good or not. What kind of play does the shaft have. Can you wiggle it side-to-side (even a little bit), in/out maybe? Post pics... with the housings on and off so we can see the whole of both wheels.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM