Ordering a Chrubo... but there's a snag
#1
Ordering a Chrubo... but there's a snag
I've got some money to burn so i decided to order up a churbo from churbo Depot. I chose this one to start with -
gt2871 DISCO POTATO turbo charger (direct bolt on turbo charger for s13 , s14 ,s15 240sx)
Intake : GT28R Style 2 bolt inlet
Outlet : 3 bolt outlet
Compressor trim: .60 ar
Compressor Wheel diameter: 71mm w/ 52 trim
Turbine wheel diameter : 53.85mm w/ 76 trim
Exhaust trim: .64 ar
Turbine flange type: t25 flange
Downpipe flange type : 240sx 5 bolt type
Cooling type: oil and water cooled
Bearing type: Wet Float Bearing
Horsepower rating: 350-400HP
Actuator set at : 8 psi
http://www.ebay.com/itm/180757557260...ht_3170wt_1348
I just got an email from the seller saying sorry we are out of stock of this turbo but I would like to send you this one - it's better
BIG TD05 18G 8CM TURBO CHARGER (WILL BOLT ON DIRECTLY TO S13 S14 S15 SR20 , CA18 ALSO)
Bearing system: Journal Bearing
Compressor Wheel Diameter: 50.3 / 68mm
TURBINE Wheel Diameter: 49.2 / 56mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 300-380 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 600
http://www.ebay.com/itm/240SX-18G-TD...ht_3116wt_1348
What Do?
gt2871 DISCO POTATO turbo charger (direct bolt on turbo charger for s13 , s14 ,s15 240sx)
Intake : GT28R Style 2 bolt inlet
Outlet : 3 bolt outlet
Compressor trim: .60 ar
Compressor Wheel diameter: 71mm w/ 52 trim
Turbine wheel diameter : 53.85mm w/ 76 trim
Exhaust trim: .64 ar
Turbine flange type: t25 flange
Downpipe flange type : 240sx 5 bolt type
Cooling type: oil and water cooled
Bearing type: Wet Float Bearing
Horsepower rating: 350-400HP
Actuator set at : 8 psi
http://www.ebay.com/itm/180757557260...ht_3170wt_1348
I just got an email from the seller saying sorry we are out of stock of this turbo but I would like to send you this one - it's better
BIG TD05 18G 8CM TURBO CHARGER (WILL BOLT ON DIRECTLY TO S13 S14 S15 SR20 , CA18 ALSO)
Bearing system: Journal Bearing
Compressor Wheel Diameter: 50.3 / 68mm
TURBINE Wheel Diameter: 49.2 / 56mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 300-380 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 600
http://www.ebay.com/itm/240SX-18G-TD...ht_3116wt_1348
What Do?
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM