What Do You Need To Recirculate Your Type-s Bv.
08-27-2006, 02:21 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Posts: 1,167
Total Cats: -1
What Do You Need To Recirculate Your Type-s Bv.
Now That im finally getting down to installing my BV, I forgot How the hell To recycle to Blow-off valve, I know it has to do somthing with the turbo inlet..what parts do I need and how do I go about it?
...Oh and pics help, Im a visual lerner..
...Oh and pics help, Im a visual lerner..
Reply
0
0
08-27-2006, 06:08 PM
#3
Senior Member
iTrader: (1)
Join Date: Mar 2006
Location: Tucson "it's 110º" Arizona
Posts: 1,017
Total Cats: 0
Attach a pipe of some sort to your Bv.
Route that pipe across your engine to the intake. Insert the pipe before the turbo, but after the MAF.
When the BOV vents, the metered air will recirculate back into the intake to be compressed once again. Notably, this is air that has been accounted for, will not be lost by VTA, and will not be re-measured by the MAF.
Route that pipe across your engine to the intake. Insert the pipe before the turbo, but after the MAF.When the BOV vents, the metered air will recirculate back into the intake to be compressed once again. Notably, this is air that has been accounted for, will not be lost by VTA, and will not be re-measured by the MAF.
Reply
0
0
08-27-2006, 06:17 PM
#4
Senior Member
iTrader: (1)
Join Date: Mar 2006
Location: Tucson "it's 110º" Arizona
Posts: 1,017
Total Cats: 0
Well here's a perfect picture, visual lerner..
https://www.miataturbo.net/forums/showthread.php?t=4371
https://www.miataturbo.net/forums/showthread.php?t=4371
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Doppelgänger
Miata parts for sale/trade
5
10-27-2007 09:51 PM
castillejos2000
Miata parts for sale/trade
22
09-16-2007 06:53 AM
