Small crack in header HELP!
06-09-2010, 02:38 PM
#42
Guest
Thread Starter
Join Date: May 2010
Location: earth
Posts: 110
Total Cats: 0
Naw man its all good. Ive got no hard feelings. And yes CR.net awiats you too brother! As well as Miata.net and all the other 100 MIATA forums! So jump on board and do what you do best......NOTHING! lol
Seriously though men, I am a little pissed that this mani is cracked. If any of you fucktards that actually believed that i was gonna use PUTTY, you really are the ones who need help. I was simply asking if this particular Tubular manifold could be welded on the runners. I stated that i would use putty as a smartass remark that was just implying that i would just trash this thing.
The mani is a SS and yes its about as good as a China one at best. As i have stated many times this whole miata thing is new to me and i dont wanna jump into something that i am not very familiar with.
So i was told that this would be the forum to frequent if i ever needed any advice. So the first time i ask, i get ridiculed and treated like a dumbfuck. Well to those who have to act like that behind a computer....your sad.....very sad.....pathetic.
But its okay and i understand that there are those that ask and then there are those that dont and pay a hefty price. THe saying goes ''A closed mouth does not get fed.''
So the mani is being taken off right now in my garage and i wil have my neighbor weld the crack later. At least i didnt have to ask any of you about welding.
Moderators you may gladly close this thread.....Peace
Seriously though men, I am a little pissed that this mani is cracked. If any of you fucktards that actually believed that i was gonna use PUTTY, you really are the ones who need help. I was simply asking if this particular Tubular manifold could be welded on the runners. I stated that i would use putty as a smartass remark that was just implying that i would just trash this thing.
The mani is a SS and yes its about as good as a China one at best. As i have stated many times this whole miata thing is new to me and i dont wanna jump into something that i am not very familiar with.
So i was told that this would be the forum to frequent if i ever needed any advice. So the first time i ask, i get ridiculed and treated like a dumbfuck. Well to those who have to act like that behind a computer....your sad.....very sad.....pathetic.
But its okay and i understand that there are those that ask and then there are those that dont and pay a hefty price. THe saying goes ''A closed mouth does not get fed.''
So the mani is being taken off right now in my garage and i wil have my neighbor weld the crack later. At least i didnt have to ask any of you about welding.
Moderators you may gladly close this thread.....Peace
Reply
0
0
06-09-2010, 02:43 PM
#43
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
You'll be alright, just take my advice and stop freakin posting in this thread, especially the way you are right now. The thread isn't gonna get locked so there's no use in trying, jsut drop outta here, continue on being a helpful forum member and everyone will forget about this thread. remember that sarcasm doesn't carry well over the interwebz and most newbies here are dumb as **** so we treat them as such.
Reply
0
0
06-09-2010, 02:44 PM
#44
Naw man its all good. Ive got no hard feelings. And yes CR.net awiats you too brother! As well as Miata.net and all the other 100 MIATA forums! So jump on board and do what you do best......NOTHING! lol
Seriously though men, I am a little pissed that this mani is cracked. If any of you fucktards that actually believed that i was gonna use PUTTY, you really are the ones who need help. I was simply asking if this particular Tubular manifold could be welded on the runners. I stated that i would use putty as a smartass remark that was just implying that i would just trash this thing.
The mani is a SS and yes its about as good as a China one at best. As i have stated many times this whole miata thing is new to me and i dont wanna jump into something that i am not very familiar with.
So i was told that this would be the forum to frequent if i ever needed any advice. So the first time i ask, i get ridiculed and treated like a dumbfuck. Well to those who have to act like that behind a computer....your sad.....very sad.....pathetic.
But its okay and i understand that there are those that ask and then there are those that dont and pay a hefty price. THe saying goes ''A closed mouth does not get fed.''
So the mani is being taken off right now in my garage and i wil have my neighbor weld the crack later. At least i didnt have to ask any of you about welding.
Moderators you may gladly close this thread.....Peace
Seriously though men, I am a little pissed that this mani is cracked. If any of you fucktards that actually believed that i was gonna use PUTTY, you really are the ones who need help. I was simply asking if this particular Tubular manifold could be welded on the runners. I stated that i would use putty as a smartass remark that was just implying that i would just trash this thing.
The mani is a SS and yes its about as good as a China one at best. As i have stated many times this whole miata thing is new to me and i dont wanna jump into something that i am not very familiar with.
So i was told that this would be the forum to frequent if i ever needed any advice. So the first time i ask, i get ridiculed and treated like a dumbfuck. Well to those who have to act like that behind a computer....your sad.....very sad.....pathetic.
But its okay and i understand that there are those that ask and then there are those that dont and pay a hefty price. THe saying goes ''A closed mouth does not get fed.''
So the mani is being taken off right now in my garage and i wil have my neighbor weld the crack later. At least i didnt have to ask any of you about welding.
Moderators you may gladly close this thread.....Peace
Oh come on keep on; keep on writing "I dont care" essays
Reply
0
0
06-09-2010, 03:19 PM
#51
Guest
Thread Starter
Join Date: May 2010
Location: earth
Posts: 110
Total Cats: 0
LOL!! I knew you were a bitch dude!!! And then all you have left is to correct grammar? What a joke.....Its all good though. Glad i could give you something to laugh about other than your youself.
Reply
0
0
06-09-2010, 03:45 PM
#57
Guest
Thread Starter
Join Date: May 2010
Location: earth
Posts: 110
Total Cats: 0
LMFAO! Geez man did i strike a nerve! Can't take it? Then dont dish it out pendejo! Like I said I can pull up at least 5 threads that you ride bandwagons on. Well as a matter of fact, you were rididng Braineacks dick when he was saying that my mani was a SS or a EDT. And you were all over that one agreeing were'nt you culero?
And then you were on this thread last night saying you thought It was a ebay mani!!
Seriously man, your the only one i see that ****** threads by jumping on whatever topic and either #1 agreeing with whatever, or #2 jumping in on the insults and bashing.
You my amigo, fail......So why dont you just give it a rest? I'm out and this thread will be closed soon so get your last word in and make yourself look more ignorant than you already appear to be. Well at least on this forum anyways. Oh, c'mon man its just fun, remember?
And then you were on this thread last night saying you thought It was a ebay mani!!
Seriously man, your the only one i see that ****** threads by jumping on whatever topic and either #1 agreeing with whatever, or #2 jumping in on the insults and bashing.
You my amigo, fail......So why dont you just give it a rest? I'm out and this thread will be closed soon so get your last word in and make yourself look more ignorant than you already appear to be. Well at least on this forum anyways. Oh, c'mon man its just fun, remember?
Reply
0
0
06-09-2010, 03:48 PM
#58
Guest
Thread Starter
Join Date: May 2010
Location: earth
Posts: 110
Total Cats: 0
Hey John,
Good point but remember when you and i were talking and I mentioned that this tubee was for a 1.8? I am wondering if i should just take this wwhole set up off and sell it to just fund for a smaller set up?
Whats your opinion? At least we can talk to eachother like men.
Good point but remember when you and i were talking and I mentioned that this tubee was for a 1.8? I am wondering if i should just take this wwhole set up off and sell it to just fund for a smaller set up?
Whats your opinion? At least we can talk to eachother like men.
Reply
0
0
