Shifto

iTrader: (1)

I was reading the FAQ post and saw the options for injectors. I then saw that that the 89-91 B2600 Truck injectors were plug and play and were perfect for my the setup I am putting together. So I went on eBay and found a set for 20, or at least what I think is a set. So I just wanted to see if what I have is in fact the correct injectors before I send them out to be cleaned and flow tested.



I tried searching here and a few other places for anything that would give me confirmation, but could not find anything that would confirm it.

ontime

This help? http://miataturbo.wikidot.com/fuel-injectors

Shifto

iTrader: (1)

No that is what I already read. It says that the injector is a "grey top" and gives the part number. Their is no where on the injector that gives the part number and I have read that even though the injector is "grey top" but can also be a tan/white color, like the one I have pictured. I was hoping someone could confirm it is the b2600 PnP injector before I spend another 80 for the injector service.

Techsalvager

if you are going with engine management dump these injectors, take your 80 and look for something 400cc <-> 500cc high imp and newer style.