First time dyno do's and dont's?
08-13-2008, 07:21 PM
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jul 2007
Location: NYC
Posts: 5,710
Total Cats: 3
First time dyno do's and dont's?
I am going to go dyno my car, my first time ever. Its a dynopack dyno. Worth doing it on this type?
Anything I should know when doing the run, achieving the most useful reading, how much should it cost(right now they are charging 50 bucks)?
Please tell me anything and everything I should know.
Anything I should know when doing the run, achieving the most useful reading, how much should it cost(right now they are charging 50 bucks)?
Please tell me anything and everything I should know.
Reply
0
0
08-13-2008, 07:54 PM
#3
$50 typically just gets you 3 pulls w/o wideband.
If there's no wideband, then I'd pass. It's always a good idea to compare your LC1 reading to what Megatune is seeing.
Take your laptop, make sure it's a fresh battery... and make sure your spare battery is charged.
Ensure your tire pressure is good.
Full tank of gas.
Plugs cleaned and gapped.
If there's no wideband, then I'd pass. It's always a good idea to compare your LC1 reading to what Megatune is seeing.
Take your laptop, make sure it's a fresh battery... and make sure your spare battery is charged.
Ensure your tire pressure is good.
Full tank of gas.
Plugs cleaned and gapped.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
