Got my miata dyno tuned on friday.
#23
Junior Member
Thread Starter
Join Date: Apr 2006
Location: bay area,California
Posts: 79
Total Cats: 0
well I went to turbohoses.com and I got my car (my mr2)tuned in livermore, as for the miata I got it tune at full function in union city, but they are dedicated to evo's now. Maybe ricky b at turbohoses can tune your car, what setup do you have on the miata.
#32
nice ride - I'd expect more torque from a 2.2...? That said, your torque curve is nice - holds forever and keeps the hp climbing.
One thing you can do to help your IC is clock that turbo more vertical and do a new bend in that IC pipe right off the compressor to get it away from the manifold. That thing has to be cooking hot. Even shield that tube.
One thing you can do to help your IC is clock that turbo more vertical and do a new bend in that IC pipe right off the compressor to get it away from the manifold. That thing has to be cooking hot. Even shield that tube.
#35
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
ok I had to look at those numbers again ... you say it's a 2.2? with a GT35R? There's some torque missing below 4500. my puny 1.8 has 200 ft-lbs at 3800 at 10 psi.
what kind of boost control are you using?
what kind of boost control are you using?
#37
Junior Member
Thread Starter
Join Date: Apr 2006
Location: bay area,California
Posts: 79
Total Cats: 0
it is a 2.0 stock bottom gen 3 from mr2 gt model in japan, not at all y old intercooler pipes ran on top of manifold not that hot at all, I will have 2 12"spal fans on it,also waiting for a trunk lid with a hole in it with a saburu scoop,like this one on this page in the middle http://www.jekylhyderacing.com/hyde/intercooler2.htm
nice ride - I'd expect more torque from a 2.2...? That said, your torque curve is nice - holds forever and keeps the hp climbing.
One thing you can do to help your IC is clock that turbo more vertical and do a new bend in that IC pipe right off the compressor to get it away from the manifold. That thing has to be cooking hot. Even shield that tube.
One thing you can do to help your IC is clock that turbo more vertical and do a new bend in that IC pipe right off the compressor to get it away from the manifold. That thing has to be cooking hot. Even shield that tube.
#38
Junior Member
Thread Starter
Join Date: Apr 2006
Location: bay area,California
Posts: 79
Total Cats: 0
I got st sway bars,fr/rear strut bars,front lower bar,255 in rears and 215 front,solid front end links,eibach pro kit springs but nowhere near a miata na on handles w/same setup, on my old miata had sway bars also and shocks,stiff springs,plus my wife misses my miata, hates my mr2